Used Wood finishing machine
6,094 resultsSubcategories
Edgebander Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details5 Head Moulder 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workp Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details6” X 12” 4-Head Roll Feed Moulder Spindles do not have keyways so hydrolock heads will work perfectly. No joi Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsHeavy top table extension right heavy carriage for tenons 2 routing guides 7.5 hp engine depth stop coach sup Location : EUROPE (Western and Northern)
Price : On request
More detailsAUTOMATIC EDGE BANDER E350 PM 400v: chain drive Hot melt glue pot (EVA) Edge height up to 45 mm Characteristi Location : EUROPE (Western and Northern)
Price : On request
More detailsE550 PM EDGEBANDER: chain drive Hot melt glue pot (EVA) Maximum edge height: 50 mm Possible edge: 3 mm in coil Location : EUROPE (Western and Northern)
Price : On request
More detailsCombined planer/cutter Supply voltage 400V Motor power P1-T 4.0 KW Motor power P2-T 5.5 KW Length of the join Location : EUROPE (Western and Northern)
Price : On request
More detailsEdgebander - Excellent Condition Flush and end trims Hot melt glue system Buffing Machine total length includi Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsOver Hand Planner Cutting Width 500mm Infeed Table Length 1400mm Outfeed Table Length 1100mm 4 Knife Cutter Bl Location : EUROPE (Western and Northern)
Price : On request
More detailsWoodchip boiler power 1100 kW feed screw, chimney, smoke filter good general condition width 2.50ml x 4.00ml x Location : EUROPE (Western and Northern)
Price : On request
More detailsedge bander length 5.32 cnc (123) following cessation of activity (lj) dismantling and removal by the purchas Year(s) : 2003 Location : EUROPE (Western and Northern)
Price : On request
More detailsPlaner Location : EUROPE (Western and Northern)
Price : On request
More detailsSaw Location : EUROPE (Western and Northern)
Price : On request
More detailsEdgebander Bi Matic BSC 3, 380 volts. Glue pot, top and bottom flush. Year(s) : 1996 Location : EUROPE (Western and Northern)
Price : On request
More detailsLOG SAW TROLLEY WITH PNEUMATIC GRIP - EVM BRAND (6000x2000) Center distance between rails 1220 05/2012 - (desc Year(s) : 2012 Location : EUROPE (Western and Northern)
Price : On request
More detailsFramer, furniture body framer Volucadreuse 2500 x 1200 in very good condition Adjustment from 100 mm to 100 mm Location : EUROPE (Western and Northern)
Price : On request
More detailsConstruction Borer 132″ Fence Capacity. • 2 Pneumatic Index Pins. • 2 Pneumatic Hold Downs. • 4 Heavy Duty Ca Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTable length: 1200x850. Sliding carriage for tenoner. 2-speed trainer. Location : EUROPE (Western and Northern)
Price : On request
More detailsGUILLET MOD QFT spindle moulder with trainer and tenoning carriage and its milling cutters and molding irons a Year(s) : 1987 Location : EUROPE (Western and Northern)
Price : On request
More detailsMida 400x170, possibility 200 Location : EUROPE (Western and Northern)
Price : On request
More detailsLINEAR SHAPER The Bacci FC4 2500 linear shaper executes milling and sanding operations on components of chair Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More detailsEdgebander from 2017. It is equipped: - anti-adhesive liquid spray unit at the entrance of the panel -pre-mill Year(s) : 2017 Location : EUROPE (Western and Northern)
Price : On request
More detailsDual-suction wide-belt sander available star boot Electric raise and lower adjustment wheel for precision 2 fo Location : EUROPE (Western and Northern)
Price : On request
More detailsSpindle moulder in very good condition, equipped with a STEFF 2034 3-roller carrier and a CPS protector / pres Location : EUROPE (Western and Northern)
Price : On request
More detailsSpindle moulder Shaft of 50 Long table tilting shaft 4 speeds 7.5 CV motor first hand, with trainer 4 rollers Year(s) : 1996 Location : EUROPE (Western and Northern)
Price : On request
More detailsYou can find used Wood finishing machine on Wotol
For second hand Wood finishing machine we have Planer / Shaper / Moulder, Sander / Polisher, Grinders, Gluing machines, Press, Drilling & Boring machines, Bonders, Sprayer / Coater, Laminator.
The main manufacturers for used Wood finishing machine are SCM, Weinig, Brandt, Homag, Wadkin, Biesse, Holzher, Ima, OTT, Casadei, Viet, Vitap, Heesemann.
The main models are Olimpic Series, S52, Compact Series, FORMULA Series, SUPERSET Series, T120C, UNIMAT Series, Rondamat Series, Profimat Series, POWERMAT Series, Optimat Series, KDN60, KDF Series, Kal 210 Ambition 2260, AKRON Series, ARTECH F 39 N, Stream B1, NV300, TD630, T630, Sprint Series, ACCURA Series, Pacific Series, RSK-O 110.