Used Woodworking Equipment
12,098 resultsFind by category
Angular Machining Center Composition: Teonnoning machine: - 1 cutting saw - 1 teonnoning machine shaft length Year(s) : 1999 Location : EUROPE (Western and Northern)
Price : On request
More detailsDrilling/pegging machine used Composition: no. 1 horizontal pegging head with 5 injectors no. 1 horizontal dri Year(s) : 2011 Location : EUROPE (Western and Northern)
Price : On request
More detailsAUTOMATIC FLEXIBLE LINE (CLOSED-RING) of SIZING and EDGE BANDING (also “SOFTFORMING”) with automatic handling. Location : EUROPE (Western and Northern)
Price : On request
More detailsDouble side – Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0 Location : EUROPE (Western and Northern)
Price : On request
More detailsFlexible N.C. line for drilling, routing and “hardware” insertion. Numerical Control “TPA” Albatros. Composed Location : EUROPE (Western and Northern)
Price : On request
More detailsHorizontal Panel Beam Saw – With rear lifting table Numerical Control MCS Evolution Software Outside Rollers Location : EUROPE (Western and Northern)
Price : On request
More detailsAUTOMATIC HYDRAULIC COPY LATHE (230/60/3 electrics) Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details(460/60/3 electrics) Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsWorking width (mm) 1200 Cutting width (mm) 1100 Cutting height (mm) approx. 60 Engine power (kW) approx. 22 St Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsCondition: used Carriage length: 3200 mm. Carriage width 360 mm. Main blade diameter 250-300-350-400 mm. Blade Year(s) : 2022 Location : EUROPE (Western and Northern)
Price : On request
More detailsBandsaw Condition: used Diameter of the steering wheels: 700 mm Max. cutting height: 460 mm Cutting width: 68 Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsArtisan carpenter at the end of his professional 1. Planer 410 SCM 2041 2. Sautereau tenoning machine with fou Location : EUROPE (Western and Northern)
Price : On request
More detailsShredder chip shredder, plates 18.5 km 400v 50 hz rotor of 700 perfect condition Year(s) : 2016 Location : EUROPE (Western and Northern)
Price : On request
More detailsVery good condition, 500 kg/hour, 55 kw engine Possibility to purchase in addition sawdust dryer with wood bo Location : EUROPE (Western and Northern)
Price : On request
More details4-sided moulder Configuration 5 tool holders (2 lower shafts, right router, left router and upper shaft, + 1 Year(s) : 2010 Location : EUROPE (Western and Northern)
Price : On request
More detailsFormat saw sold following the purchase of a digital flatbed saw. 3.20 m table, 300 mm blade + independent scor Location : EUROPE (Western and Northern)
Price : On request
More detailsEdge banding machine Pre-milling cutters Glue container granulate, applied by roller Pre-guillotine Pressure r Location : EUROPE (Central and Eastern)
Price : On request
More detailsFULL FLEXIBLE LINE (4-SIDES) of panels Cutting plus Sizing & Edge Banding Composed of the following machines: Location : EUROPE (Western and Northern)
Price : On request
More detailsC.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control Location : EUROPE (Western and Northern)
Price : On request
More detailsSINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Veneer edges limited Location : EUROPE (Western and Northern)
Price : On request
More detailsWIDE BELT SANDER CE STANDARDS Year(s) : 1993 Location : EUROPE (Western and Northern)
Price : On request
More detailsCalibrator double belt sander 1100mm In good condition Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsUsed Robland SD410 Jointer planer Useful machining width 410 mm Mechanical display of machining height Total Year(s) : 2017 Location : EUROPE (Western and Northern)
Price : On request
More detailsGRINDER 4 tool holders Positioning on SIKO meter 4 5.5 HP motor Electric raise and lower Wood drive motor + Au Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More detailsRefurbished Drum Chipper Drop feed unit. Fully refurbished drum chipper complete with paint. Perfect for a sit Location : OCEANIA
Price : On request
More detailsMachine or tools that is intended to process wood, known as Woodworking Machinery.
Wood is cut by sawing, milling, planing, drilling, grooving, grinding, peeling, and polishing
Woodworking machines are used to fashion raw wood materials into various materials and semi finished products (beams, boards, plywood, shavings, and slabs), parts of articles and structural members (for furniture, agricultural machinery, railroad cars, and ships), and finished products (furniture, windows, doors, parquet, building floors, containers, skis, musical instruments, and office supplies).
Some machine brand in woodworking:
SCM, Wadkin, Weinig, Biesse, Homag, Brandt, Holzher, Delta, Rockwell, Ima, Weeke, Kuper, OTT, Powermatic, Casadei, Omga, Griggio, Felder, Heesemann, Centauro, Balestrini, Costa, Martin, Cefla, Holzma, Scheer, Bacci, Altendorf, Holz-Her, Sac, Sedgwick, Ritter, Viet, Italpresse, SCMI, Morbidelli,
Masterwood, Minimax, Vitap, Sicar, Bauerle, General, Dewalt, Camam, Panhans, Comec, Gabbiani, Stromab, Orma, Burkle, Casolin, Raimann, Newman, Schelling, Busellato, Stetson Ross, Paoloni, Samco, Timesavers, SCM Sandya, DMC, Stefani, Gannomat, Selco, Striebig, Pade, Steton,
Hess, Cantek, Dominion, Cosmec, Haffner, Hebrock, Koch, Maggi, Weima, Guilliet, Diehl, Whirlwind, Friulmac, Giben, Oliver, IDM, Josting, Cehisa, Hymmen, Kolle, Mereen Johnson, Primultini, Celaschi, Kupfermühle, Northfield, Vollmer, Mattison, Taylor, Ganner, Langzauner.