Used Yarn manufacturing (sythetic, cotton...)
4,170 resultsUsed Carding machine Befama CU660 2200 mm with a new weighing Hopper Feeder. Machine is after general renovati Year(s) : 1990 Location : EUROPE (Central and Eastern)
Price : On request
More detailsWith exit to manual winder MOTOCONO model L 24 28 Heads (12+16) With Winder Year(s) : 2001 Location : EUROPE (Western and Northern)
Price : On request
More details– 3 tines/spindles. – 100 mm cone with footage and liquid paraffin. – External measurements of 1,110 x 700 mm. Location : EUROPE (Western and Northern)
Price : On request
More details– 5 hp motor at 230/400 V. – 160 mm inlet. – Breathable padding bag of Ø600 x 1,600 mm. – External measurement Location : EUROPE (Western and Northern)
Price : On request
More details– 5 hp motor at 230/400 V. – Ø160 mm inlet. – Breathable padding bag of Ø600 x 1,600 mm. – External measuremen Location : EUROPE (Western and Northern)
Price : On request
More details– 2 ribbons. – 45mm tape. – 12 healds. Location : EUROPE (Western and Northern)
Price : On request
More details– 4 tines/spindles for 10″ x 4-20º cone. – Individual motor per tine with pre-feeder and thread guide. – Preci Location : EUROPE (Western and Northern)
Price : On request
More details– 12 tines/spindles for 8″ x 200 mm biconical useful cone. – One sided. – Paraffinizer. – External measurement Location : EUROPE (Western and Northern)
Price : On request
More details– 3 tines/spindles. – 100 mm cone with footage and liquid paraffin. – External measurements of 1,110 x 700 mm. Location : EUROPE (Western and Northern)
Price : On request
More details– 3 tines/spindles. – 100 mm cone with footage and liquid paraffin. – External measurements of 1,110 x 700 mm. Location : EUROPE (Western and Northern)
Price : On request
More detailsMartori brand – 2 tines/spindles. – 100 mm cone with footage and liquid paraffin. Location : EUROPE (Western and Northern)
Price : On request
More detailsbrand Martori – 2 tines/spindles. – 1 spike for a 100 mm cone without footage and with liquid paraffin. – 1 p Location : EUROPE (Western and Northern)
Price : On request
More details– 10 tines/spindles. – 1 Splicers. – Revised. Year(s) : 1999 Location : EUROPE (Western and Northern)
Price : On request
More details– 4 tines/spindles for a 6″ x 4-20º and 5-57º cone. – Individual motor per spike. – 1 sections of 4 spikes/sec Location : EUROPE (Western and Northern)
Price : On request
More details– 2 tines/spindles with one motor per tine. - Paraffin. – Gatherer to two ends. – Electronic shots by wire. – Location : EUROPE (Western and Northern)
Price : On request
More details– 4 spikes. – 6″ impeller with a 4-20º cone. – To double 2 or 4 ends. – 2.25 hp motor at 230/400 V. – External Location : EUROPE (Western and Northern)
Price : On request
More details– Working width 1,000 mm. – Inlet and outlet Ø300 mm. – Measures of condenser 1,300 x 1,000 x 1,000 mm. – Silo Location : EUROPE (Western and Northern)
Price : On request
More details– Useful width of 1,000 mm. – Ensiamage system. – PVC telera. – Ø960 mm drum with 1,270 Ø8 x 30 mm conical nai Location : EUROPE (Western and Northern)
Price : On request
More details– 10 hp motor at 1,440 rpm and 230/400 V. – Useful width of 700 mm. – Ø 800mm. – Length 2,500 mm + outlet. – 2 Location : EUROPE (Western and Northern)
Price : On request
More details– Drum of 2,000 mm useful width x Ø 518 mm. – Nails of Ø 4 mm conical x 12 mm long. – For fibers 60/70 mm long Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More details– 12 tines/spindles (2 sections of 6 tines/spindles). – Direct engine. – 6″ x 5.57ºsmall cone. – Variable spee Year(s) : 1996 Location : EUROPE (Western and Northern)
Price : On request
More details– 12 tines/spindles. – 6” 4º-20 cone. Year(s) : 1995 Location : EUROPE (Western and Northern)
Price : On request
More detailsYear(s) : 1994, 1995 Location : ASIA (South)
Price : On request
More details– 3 tines for 10″ x 5-57º cone. – Pineapple at 230 V. – 2 phases. – Independent benches. – Outside creel with Location : EUROPE (Western and Northern)
Price : On request
More details– 6″ x 4-20º and 5-57º race. – 1 Mach Mini type pick with 12-position revolver. – Cones of Ø120 mm maximum. – Location : EUROPE (Western and Northern)
Price : On request
More detailsYou can find used Yarn manufacturing (sythetic, cotton...) on Wotol
For second hand Yarn manufacturing (sythetic, cotton...) we have Full factory, POY, FDY, DTY, BCF, CP, etc, Carding, Preparation (bale breakers, openers and presses), Drawing, Combing, roving, Gillbox, Spinning machines (Ring), Spinning machines (Open End), Twisting / Two For One (TFO), Texturizing machines, Covering machines, Doubling machines, Winding and reeling, Yarn Winder with waxing/sizing device, Autoclave, Sample and testing equipment, Auxilliary machines, Accessories and spare parts.
HS code 8445 - Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 84.46 or 84.47.
Questions and answers between users
Q: What are the meaning of the different yarn counts?
A: The yarn count indicates the sise of the yarn. It is a ratio between the fix weight and the variable lenght of the yarn. The thinner the yarn is the higher its count number is high. There are 3 main tymes of counts: tex, denier (DS), Nm (metrical number).
- Tex is the weight in gram for 1000 meters of yarns (tex is 1mg/m, dtex is 0,1 mg/m, etc)
- Denier (US and UK system) is the wight in gram for 9000 metes of yarn
- Nm (French system) gives the number of meter per gram of yarn. Ex Nm 50 = 50 meters of yarn will weight 1 gram
THere are few others like Ne(I) and Ne(w) that are used specifically for hank.