Menu

Alva ALLEN OBI PUNCH PRESS 12 TON

Ref : 2130098-3-MT
Condition : Used
Manufacturer : Alva
Model : ALLEN OBI PUNCH PRESS
Pressure : 12 TON
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

ALVA ALLEN OBI PUNCH PRESS
Size: 12 TON
Model: BT-12

Capacity: 12 Tons
Standard Stroke: 1-3/4"
Strokes Per Minute: 160
Adjustment of Ram: 1-1/2"
Shut Height, Bed to Ram (Ram Down, Adj. Up, Standard Stroke): 8"
Distance from Center of Ram to Frame (Throat): 5"
Crankshaft Diameter at Main Bearings: 1-3/4"
Die Bed Area: 14" LR x 7-1/2" FB
Die Bed Holes (Center to Center): 12" LR x 3-1/2" FB
Opening in Bed: 7-1/2" LR x 5-1/4" FB
Bolster Plate: 14" LR x 7-1/2" FB x 1" Thick (2 Pcs. of 1/2" Plate Welded Together)
Maximum Area of Ram: 6-3/8" LR x 3-1/4" FB
Ram Face Type: 7
Hole in Ram for Die Shank: 1-9/16" Dia. x 2" Deep
Knock-Out Bar Adjustment: 1-3/4"
Width of Opening Through Back of Frame: 5-3/4"
Maximum Degrees of Inclination: 30

EQUIPPED WITH:
TriTronic Safety Control System for Work Area (Wired for Single Phase, 110 Volts)
Air Actuated Mechanical Clutch with Ross Air Control Valve
Dual Hand Palm Buttons Trip Control
Motor and Flywheel Guard
OEM Parts / Operation Manual
The Machine is in Good Running Condition with Assembled Parts as it Stands.
It Also has the Following New Spare Parts:
These Parts are New Unused and Uninstalled: Upper Crank Shaft, Connecting Rod
Connector Screw, Screw Cap, Ram, Ram Ways and Bronze Crankshaft Bushings

1 HP Motor, Wired for 3 Phase, 60 Hz, 208/220/440 Volts
Presently Wired for 220 Volt Operation

Overall Size: 29" LR x 37" FB x 66" High x 1,120 Lbs. (Machine Only no Skid)
Machine on the Skid: 40" x 40" x 71" High x 1,156 Lbs.

Other machines similar to Alva ALLEN OBI PUNCH PRESS 12 TON

1
Location : AMERICA North (USA-Canada-Mexico)
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2005
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1995
1
Location : AMERICA North (USA-Canada-Mexico)