Austin American Micro-Jet FC Inline PCB Cleaner

Prewash and Wash The prewash section can serve
as an extension of the wash section
(for use with wash chemistry)
or operate in a full cascade mode direct to drain.
Pressure balance valves and a flow meter are included.
The recirculated wash section
features Progressive Energy Dynamics
which optimizes impingement force
and flow without operating at unnecessarily high pressures. Water is heated and recirculated at a flow rate
of 120 GPM, and an optional chemical injection system
can add saponifier or defoamer.
The Chemical Isolation section can be configured
with spray, air blow-off, or both.
This can dramatically reduce the amount
of wash chemistry used,
thus significantly reducing operating costs.
In addition, it increases resin bed life when the rinse
is recycled through a closed-loop system. .
Power Rinse and Final Rinse Heated
and recirculated water utilizing Progressive Energy Dynamics
is directed on the PCB during the power rinse.
The final rinse, which can introduce deionized water
into the system, uses as little as 2 GPM.
Patented Dynamic Drying Austin American
Technologyʼs patented Jet Manifold drying system
removes water from the PCB without adding heat,
eliminating the tendency
to “bake” unwanted ionic contamination
on to the assembly.
This technology also reduces operating costs
and increases blower life