CCS 602 A 200 Computer slicer

Products into slices with adjustable thickness of 0,1 to 50 mm

Product carrier PZF 10.30.10.000
Carrier unit for product length up to 1,200 mm
Product support belt. The support belt moves forwards up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
Execution ground and polished.

Transfer unit CCU 10.10.10.010
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. It is attached to the discharge
side of the Slicer and able to be swung out from the side. The inclination
of the CCU can be set progressively. The transport means and the rollers
can be easily removed.

CCU standard,
with portioning conveyor and control conveyor.

Portioning conveyor with flat belts,
Length of portioning conveyor approx. 170 mm.

Control conveyor with round belts,
Length of control conveyor approx. 510 mm.

Slicing bar SKE 10.10.00.000
Slicing bar horizontal, straight

Knife head MKF 60.00.00.000
Circular knifehead HSK 98 0°
Speed increasing ratio 1: 5.7

Slicing throat SST 80.20.00.000
Slicing throat, width adjustable up to 360 mm,
height adjustable from 125 up to 165 mm
Downholder, pneumatic

Checkweigher CCW-200 10.10.00.100
Digital weighing system with transport speed up to 1.300 mm/s.
Weighing housing bevelled. For cleaning it, the checkweigher must
not be dismantled. Checkweigher completely made of stainless steel.

Mono Checkweigher,
weighing-table length approx. 485 mm, width approx. 375 mm,
capacity up to max. 100 weight measurements/minute
(depending on portions)
max. portions weight 1,000 g,
resolution (precision and display +/- 0,1 g),
weighing-table with round belts.

Rocker integrated in Speed Loader
Mono Rocker
length 450 mm
width 400 mm
Standard execution with round belts

Speed-Loader CCA 10.40.20.500
Automatic high-speed loader, providing the die formats for the packaging
machine and infeeding them into it. Loader housing in lift design. All belts
are powered by speed-driven servo motors. The transport equipment can be
easily removed for cleaning. The line divider is positioned by a servo-driven
ball roller spindle. The photoelectric barriers are shock-protected. The
speed-loader has its own controller which is linked to the machine
controller. The Slicer and loader are both operated from the same position.
The maximum diameter of the lower film roller of the packaging machine
is 800 mm.

In certain cases the speed-loader CCA works as loading aid only,
manual correction might be necessary.

4-track grouping conveyor, with 4-drives,
currently set-up for 4-track application (Width: 4x approx. 135 mm)

2x Cross clamping pieces, width 160 mm each

2-track line dividing, with separate drives
Line dividing 1 to X
Line dividing 2 to X

With 4 buffering conveyors,
length approx. 500 mm.

Infeed conveyor
usable width approx. 570 mm,
length of conveyor approx. 1,500 mm.

WITHOUT reject conveyor

Additional increase of the feet SFE 30.00.00.000
For Slicer model MCS.

1 Pc. Weber circular knife WKM 10.10.20.460
Angle, cutting edge 22°
Execution without teeth
coated, without coated cutting edge.
Diameter 460 mm

1 Pc. Blade guard for Weber circular knife, diameter 460 mm

2 Pcs. Downholder NH
Downholder in pneumatic execution
Execution with roller

1 Pc. Automatic product grippers APR
for product width from 180 up to 200 mm
for product height from 90 up to 110 mm
for meat and sausage products