Cincinnati 24” x 80” 480AH ANGLE HEAD STEP GRINDER

24” x 80” CINCINNATI 480AH ANGLE HEAD STEP GRINDER
Year: 1986


STANDARD SPECIFICATIONS
Maximum work piece diameter ground with new wheel…………….. 24”
Maximum work piece swing diameter……………………………….. 24”
Maximum work piece/grind length…………………………...……… 80”
Maximum work piece weight…………………………………..……. 1000 lbs.
Grinding wheel size……………………………………………...…… 30” x 4” x 12” bore
Angle of wheel head to table…………………………………………. 30 deg.
Standard work piece center hole (included angle)……………………. 60 deg.
Grinding wheel surface speed………………………………………… 8500 ft./min.
Radial infeed resolution………………………………………………. 0.000025”
Diametrical infeed resolution…………………………………………. 0.000050”
Radial infeed rate resolution………………………………………….. 0.001 IPM
Diametrical infeed rate resolution………………………………….…. 0.002 IPM
Infeed rapid positioning radial rate in run mode……………………… 250 IPM
Infeed rapid set-up positioning radial rate in prove mode…………….. 50 IPM
Head stock spindle speeds – variable…………………………………. 10 – 550 RPM
Head stock spindle nose mount……………………………………….. A1-6
Head stock inside taper……………………………………………….. 14 Jarno
Head stock type……………………………………………………….. Combination live/dead
Overall dimensions……………………………………………………. 262” x 158” x 103” high
Machine weight – approximately…………………………………….. 28000 lbs.

EQUIPPED WITH:
Cincinnati Milacron 700G CNC Control System.
Gaging system.
Full set of manuals.
25 HP Spindle motor drive……………………………….. 240/3/60
3 HP Head stock motor.
Live & dead center head stock.
Tail stock dresser.
Stand alone electrical panel.
Gap in bed is 10” wide x 4” deep.