Menu

Complete Hot Dispersion Plant of 2001 150 Tpd

Ref : 1094699-2-CP
Condition : Used
Manufacturer : -
Type : Complete Hot Dispersion Plant of 2001
Capacity : 150 Tpd
Year(s) : 2001, 2011
Quantity : 1
Location : Seller or machines location:
EUROPE (Western and Northern)
Last check : 07 Jan. 2019

Complete Hot Dispersion Plant, Capacity 150 Tpd of 2001
with Raw Material: waste corrugator trims,

consisting of the following:

1/ 4 x vertical thickening presses type PV-230
To thicken pulp out of cleaning phase
With following characteristics:
- material: waste paper
- pulp density in: 3-4%
- pulp density out: 10-12%
- absorbed power: 4,5 KW each
- installed power: 5,5 KW each
- screw speed: 63 rpm
- motor speed: 1450 rpm
- basket holes Ø: 2 mm
- body in AISI 304; screw in AISI 304; baskets AISI 304 with conic holes, complete with reinforcing rings in AISI 304; shaft in AISI 304; oil lubricated bearings
Complete with:
- speed reductor
- elastic joint to connect speed reductor and screw
- stainless steel support for the 4 presses

2/ Stainless steel screw (left-right)
With open box, complete with pulleys, belts, belts protection and 2,2 KW motor reductor, 50 Hz

3/ Horizontal press type PO-500
To thicken pulp out of vertical presses
With following characteristics:
- material: waste paper
- pulp density in: 10-12%
- pulp density out: 30%
- absorbed power: 50 KW
- installed power: 75 KW
- screw speed: 35 rpm
- motor speed: 1450 rpm
- basket holes Ø: 2 mm
- body in AISI 304, screw in AISI 304 high thickness, basket with external holes in AISI 304 high thickness, changeable basket with internal holes in AISI 304 with conical holes, basket on the screw in AISI 304 with conical holes for internal drainage
- pneumatic group on the final part of the screw, to regulate thickness of pulp density outcome
Complete with:
- elastic joint to connect press and reductor
- speed reductor
- elastic joint to connect speed reductor and electric motor
- stainless stell joints protections
- stainless steel basement for the press, complete of AISI 304 vat water recovery
- stainless steel basement to connect speed reductor and electric motor
Electric motor must be driven by an inverter

4/ Heating horizontal tunnel type TL-800
To heat pulp coming out of horizontal press
With following characteristics:
- material to heat: waste paper
- pulp density: 30%
- working temperature: 90 C° max
- absorbed power: 14 KW
- installed power: 18,5 KW
- screw speed: 16 rpm
- motor speed: 1450 rpm
- width in: 550 x 550 mm
- width out: 450 x 350 mm
- steam connections Ø: 50 mm
- number of steam connections: 8
- dimensions: 800 x 7000 mm
- body in 2 halves in AISI 304; shaft in AISI 304; with oil lubricated bearings, stainless steel bearings holders, inspection covers in AISI 304, transmission between motor and screw through motor reductor, toothed wheels and chain

5/ Dispersor type DS-950
For the pulp coming from the heating tunnel
With following characteristics:
- material: waste paper
- pulp density: 30%
- absorbed power: 400 KW
- installed power: 500 KW
- dispersor speed: 960 rpm
- motor speed: 960 rpm
- width in: 350 x 350 mm
- width out: 240 x 1250 mm
- dispersion rings Ø: 850 mm
- feeding screw speed: 247 rpm
- screw motor speed: 1450 rpm
- screw absorbed power: 4 KW
- screw installed power: 5,5 KW
- dilution water flow: 1800 lt
- dilution water pressure: 5 bars
- stailess steel bearings holders; stainless steel dispersor body covered in AISI 304, all parts in direct contact with pulp are high thickness covered; rotor in AISI 304; dispersion rings in chrome-nichel stainless steel, wear resistent; shaft in hardened AISI 240; with oil lubricated bearings, stainless steel openable front door covered in AISI 304, complete with manual regulation of the dispersion rings; feeding screw in AISI 304; complete with motor reductor group

Plant stopped 2012, STILL INSTALLED,
in excellent condition !