Menu

IDM IDIMATIC 66/20

Ref : 2022836-15-MT
Condition : Used
Manufacturer : IDM
Model : IDIMATIC 66/20
Year(s) : 1997
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)
Last check : 10 May. 2019

Voltage: 230/460V, 60Hz, 3Ph
Edgebanding thickness capacity
10 -- 50 mm (3/8" -- 2") panel thickness
60 mm (2-3/8") minimum panel width & 140 mm (5-1/2") minimum length
Pre-milling station with (2) 3 HP -- 12,000 RPM
counter rotating vertical milling heads:
both with pneumatic jump control
30 mm spindles and SIKO digital readouts for setup & adjustments
fully enclosed by noise insulated cabin
Front & rear end trims (motors 0.8 HP -- 14,400 RPM each)
motors tilt 0° - 12° on horizontal plane
2nd blade setup allows 45° chamfer cut
Top & bottom rough trims (motors 2.5 HP -- 14,400 RPM each)
tilts 0- 30°
Top & bottom fine/bevel/profile multi-function trims
(motors 0.9 HP -- 12,000 RPM each), tilts 0°- 10°
for bevel and 3 mm PVC corner round (prepared
for "quick change" of motors
for interchangeable 2nd set of bevel/radius trim units)
Corner rounding units from trimming leading & trailing upper
and lower edge/corners when edgebanding all (4) sides or
when edgebanding "soft- or postformed" panels
(4 motors 0.8 HP -- 14,400 RPM each), 1" maximum radius

Other machines similar to IDM IDIMATIC 66/20

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1996
1
Location : EUROPE (Western and Northern)
Year(s) : 1989
1
Location : EUROPE (Western and Northern)
Year(s) : 1999
1
Location : EUROPE (Western and Northern)
Year(s) : 2001