Kitagawa, Seiki VH1-1681
ASIA (North East)
Kitagawa Seiki 400℃ high temperature compatible vacuum press equipment VH1-1681 Management number 10825
Pressure: 30-390kN (approximately 3-39 Ton), maximum 20Mpa (hydraulic pressure)
Netsuban dimensions: 300 x 300 x 65 mm, 2 sheets
Netsuban spacing: 150mm
Heating/cooling: Electric heater netsuban
Number of stages: Single stage
Operating temperature: Maximum 400℃
Electric heater for heating: 3.735kw/1 side x 2 sides
Climbing speed: 160mm/min (50Hz)
Descending speed: Dead weight descent
Hydraulic unit: Hydraulic pump 4P-0.75kw, tank 14L
Vacuum equipment:
Vacuum pump 0.55kw x 1 unit
Ultimate vacuum -99kPa(-0.099Mpa)
Power source: 3-phase 200V, 50Hz, 9kw
Air pressure source: 0.5 to 0.7Mpa, 50NL/sec x several seconds
Cooling water source:
Always 0.05-0.15Mpa, room temperature, 5L/min
When cooling 0.15~0.2Mpa, room temperature, 15~20L/min
Weight: Approximately 1.2Ton
Dimensions: Approximately W800 x D1800 x H1600mm (D2650mm when door is open)
Operating environment: Installation location: 30℃ or less
Safety devices: Emergency stop button, area sensor
[Device status]
No instruction manual, specifications included