Leader LMC 523C Compact

Used 9" 5 Header Moulder.
SPECIFICATIONS;
Width – Material .6” to 9” (12” & 13” optional)
Thickness – Material ¼” to 6” Note: 8” or 10” thick optional
Min length of material 8” (Butt Fed)
Axial adjust. side heads 1.6 (40 mm)
Axial adjust. top/btm heads .8”(20mm)
Net weight 9,850 lbs.
MAIN FRAME, MACHINE BED & ENCLOSURE
* 1 Piece – Cast Iron Main Frame. Specially heat treated for maximum stability and minimum vibration
* 78 inch (2 meter) long Adjustable Straightening Infeed Table and Fence (each adjustable .4 inch) – other lengths optional
* Tables, Chipbreakers & fences are Hard Chromed with approx..012”-.014” chrome thickness (except 1st bottom receiving plate
which is alloy steel specially hardened for best wear ability)
* Lift up sound & safety enclosure incl. safety interlocks & strobe-free lighting inside enclosure.

DRIVE INCLUDES
* Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roll station
* Powered rise and fall to extra heavy feed support beam by 1 HP/.75 kW motor.
* 8 Top Driven Feed Roll Assemblies (each equipped with Multiple 2” wide rolls that can be quickly spaced/positioned or removed as desired)
* 2 driven Full Width Bed(Bottom) Rolls & 1 Idling Full Width Bottom Midfeed Roll
* All Infeed Top Rolls are Hardened, Serrated and Chromed to resist wear and prevent chips and shavings from sticking to them
* Top feed rolls after top head are Polyurethane
* Intermediate short stock top driven feed roll station with pneumatic pressure for feeding minimum 8”(200mm) length work pieces.
It is easily flipped up for rear side head removal.
* Inch forward & reverse to feed w/ duplicate control at top head position for fast & easy setting
* Feed roll diameter 5.5” / 140mm
* 5 HP VFD Variable Speed Drive from 20-80 FPM with Digital Speed Readout (can actually run faster if desired)

SPINDLE ASSEMBLIES, CUTTERHEADS & POSITIONING
* All Heads are Standard 6000RPM (7200 or 8000 optional) and belt driven
* 1 13/16” diameter spindles (40mm, 1 ½”, 50 mm – Optional)

* All Spindle Axis(Vertical & Horizontal) throughout the Moulder that don’t have Setworks or Dual Siko Counters have Digital
Position Readouts for Radial & Axial (vertical & horizontal), fast and accurate setting (except 1st Bottom Axial)
* Vertical Spindle – Axial (Vertical) Adjustment – 1.6”
* Horizontal Spindle – Axial (Horizontal) Adjustment - .8”
* Independent manual vertical adjustment to top head(s).

HEAD HP CUTTERHEAD SWING HOOD SIZE
1) 1st Bottom Head 15 HP 4.9” to 6.3” (125 – 160 mm) 4.9” (125 mm)
2) Right Side Head 10 HP 4.4” to 8” (112 – 200 mm) 4.9” (125 mm)
3) Left Side Head 15 HP 4.4” to 8” (112 – 200 mm) 4.9” (125 mm)
4) Top Head 20 HP 3.9” to 8” (100 – 200 mm) 4.9” (125 mm)
5) 2nd Bottom Head 20 HP 3.9” to 8” (100 – 200 mm) 4.9” (125 mm)

460V 3PH.