Used Planer / Shaper / Moulder

- LL version, with 2500mm worktop extension - SPV222 electronic programmer - shaft D = 35mm - motor 5.5 kw / 7... Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Table dimensions: 1,200 x 730 mm Shaft diameter: 50 mm Shaft rotation speed: 3,000 / 4,500 / 6,000 /... Location : EUROPE (Western and Northern)

Price : On request

5 Head Through Feed Moulder Heavy duty construction designed for continuous production Very good condition Location : EUROPE (Western and Northern)

Price : On request

Width: 61cm electric up / down + manual lifting 2 rollers at the bottom 3 knife shaft max planing height 20cm... Location : EUROPE (Central and Eastern)

Price : On request

Table top length: 210cm width: 41cm 3 knife shaft angled culaga 2 tilting tops max planing height: 18cm 1 feed... Location : EUROPE (Central and Eastern)

Price : On request

With 2 controlled axis (shaft height - guide measure) - CE standard Table dimensions mm 1900 x 800 Ext... Location : EUROPE (Western and Northern)

Price : On request

With 2 shafts (Surface/Thickness planer ) for wood panels, packaging, carpentry , funeral hoods Technica... Location : EUROPE (Western and Northern)

Price : On request

Working width mm 415 Table length mm 2700 N° 4 knives - Speed 5000 rpm Motor Hp 4 Tilting guid... Location : EUROPE (Western and Northern)

Price : On request

12HP main motor 230 volt 3 phase power raise & lower of bed powered table roller, adjustable height variable s... Year(s) : 1988 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity 9" x 5" Spindle Diameter 1-13/16" Spindle speed 6000 RPM Head configuration and Horsepowers; Botto... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Motor 5,5 kW planing width ca. 630 mm planing height ca. 250 mm joint pressure plates rubber- feed roller rubb... Location : EUROPE (Western and Northern)

Price : On request

Motor 7,5 kW planing width ca. 630 mm planing height ca. 250 mm table-sliding rolls 2 adjustable joint pressur... Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Motor 5,5 kW planing width ca. 510 mm planing height ca. 250 mm joint pressure plates rubber- feed roller rubb... Year(s) : 1987 Location : EUROPE (Western and Northern)

Price : On request

-6,000 RPM spindles -3 HP feed motor -10 HP bottom -10 HP left side -10 HP right side -15 HP top spindle -10 H... Year(s) : 1993 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

-Working capacity: 230 mm x 130 mm -Motors: 7.5 HP bottom, 10 HP right/left and 15 HP top. -Spindle diameter:... Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Spindle configuration: (B-T-R-L-T-B) Working cap: 12” x 4-3/4” Motors: B-25 HP,T-30 HP, R-15 HP, L-20 HP, T-3... Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

-Weinig Unimat Gold 6-Head (B-R-L-T-T-B) -Working cap. 9-1/16" x 4-3/4". -Head sequence: Bottom 10 HP, right 1... Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

With grinder 929 Rondomat Knive grinder included Lots of heads and knives include Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

20 inch SCM planer 220 volt three phase Power rise and fall of table Variable speed feed Brand new gibs on T... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

<b>1x GREENLEE, Planer</b> Top cutting, helical carbide cutter head electrical height adjustment Workin... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

<b>1x SCMI, T130, Shaper, 1985</b> 5-speed heavy duty single spindle shaper to cut linear shapes inclu... Year(s) : 1985 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

<b>1x NORTHFIELD, No. 9, Double Spindle Shaper</b> Including 'handmade' fences (shown on 1st pic) Includi... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

15" 3HP 1PH 220V Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Working width: 530 mm length of table: 2m90 fence can be tilted 4 knives in cutterblock, diam. 120mm, tersa Mo... Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

Useful width: 500 mm Max. pass in height: 300 mm Surfacing table with 2 m. length 1ste bottom spindle with 12,... Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request