Used Planer / Shaper / Moulder

250 mm DIAMETER useful 150 mm thick, in paper or plastic film, automatic with belt drive, at 380 v The dimens Year(s) : 1999, 2000 Location : EUROPE (Western and Northern)

Price : On request

Brand : SIMUN 50 mm milling machine. axle, 21 mm. high, 7.5 hp. power at 380 V. voltage, special chairs and Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Consists of 4 manual blades With measures of 350mm useful table With a power of 4CV, a voltage of 380V The mac Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

Made up of 4 blades With measures of 500 mm useful table It has a power of 5.5CV, and a voltage of 380V The ma Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Brand : SIMUN 50 mm machine. of axis, without guides or palograma economic and painted. 4 CV. at 380 V. volt Location : EUROPE (Western and Northern)

Price : On request

Consisting of two heads and four horizontal sanding shoes, with cork shoes and glued sandpaper. Two 3 hp eng Location : EUROPE (Western and Northern)

Price : On request

50mm spindle milling machine, tiltable at 45º. With a 7.5 hp motor and 380 v voltage. 3 speeds on axis, with Location : EUROPE (Western and Northern)

Price : On request

Brand : SAGRERA Thicknesser of 500 mm. table, automatic rise and fall. 5.5 cv. motor, at 380 v. voltage Fou Location : EUROPE (Western and Northern)

Price : On request

630 mm table top. Automatic raising and lowering of 4 hss blades normal. The machine has a power of 7.5 hp of Location : EUROPE (Western and Northern)

Price : On request

500 mm. table, 4 blades. Of 7.5 CV. motor power Foundry machine. Without regulations External measurements 100 Location : EUROPE (Western and Northern)

Price : On request

430 mm. width of table, with four blades of 430 x 30 x 3 Hss Cast iron table, very robust. 21 mm. height of pa Location : EUROPE (Western and Northern)

Price : On request

Brand : SAOMAC With saw, spinning tops and spindle moulder, with moldings. Side carriage and aluminum spinn Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

Thicknesser consists of 4 blades. With measures of 530mm useful for the table, and 240mm in height. With a p Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Brand : IMAG with 400 mm. width of table, with plates of 2700 long and with group manual drill 5.5 hp engin Location : EUROPE (Western and Northern)

Price : On request

Brand : LLURO 350 mm. table width, 2100 mm. chainring length, with 3-blade axis. 3 cv. motor at 380 v. vol Location : EUROPE (Western and Northern)

Price : On request

530 table width and 2800 mm plate length with a 4-blade hss axis, and a 5.5 hp motor and 380 v voltage Location : EUROPE (Western and Northern)

Price : On request

Brand : SUPA 200 tables wide, and 1100 mm long of plates with je of 4 blades of 3 hp, at 380 v voltage, wi Location : EUROPE (Western and Northern)

Price : On request

400 mm wide table and 2,200 mm long, with 4 hp power and 380 v voltage, 3-blade hss axis, new machine, CE re Location : EUROPE (Western and Northern)

Price : On request

Brand : MISIL 50 mm milling machine. axis, square, with 1215 regulations Machine to review, painted. 5.5 CV Location : EUROPE (Western and Northern)

Price : On request

Brand : SIMUN Square, with 50 mm. of axle, with a trolley to glean with a pneumatic clamp and prepared to co Location : EUROPE (Western and Northern)

Price : On request

50 axis, cast iron with 5.5 HP. power at 380 V. voltage Slotted tables and prepared to put drag feeder Without Location : EUROPE (Western and Northern)

Price : On request

Without CE. 50mm shaft. diameter, 180 mm. high, prepared for 1215. With a 5.5 HP engine. and voltage to 380 V Location : EUROPE (Western and Northern)

Price : On request

With useful measurements of 2500mm by 120mm The machine has a composition of incisor, grinder and router With Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

Shaft 50 mm. Casting table, like the rest of the machine. With 3 roller feeder. 5.5 hp engine. 3 motor speeds Location : EUROPE (Western and Northern)

Price : On request

With measures of 1800 mm of table. The machine has a power of 10 CV, a voltage of 380V. The machine has 4 ax Location : EUROPE (Western and Northern)

Price : On request