Leblond Engine Lathe 670 RPM 50/30 Raised 4625 NK Tape Turn I – Flat Bed

LeBlond 50/30 Raised 4625 NK Tape Turn I – Flat Bed
Year Rebuilt 2000

Control Fanuc 18it CNC
Swing Over Bed 50.00 in, 1270.00 mm
Swing Over Cross Slide 33.00 in, 838.20 mm
Distance Between Centers 180.00 in, 4572.00 mm
X – Cross Slide Travel 28.00 in, 711.20 mm
Chuck Diameter 28 in (711 mm), manual, independant
Chuck Type 4-Jaw integral with bolt-on hard jaws
Spindle Bore 3.06 in, 77.777 mm
Spindle Power 75.00 HP 56.25 Kw
Spindle Speed 3 – 670 RPM infinitely variable
Spindle Nose L3
Tailstock Non-programmable with #6 Morse Taper
Tailstock Quill Diameter 8.00 in, 203.20 mm / 18.00 in, 457.20 mm Travel
Weight Capacity Between Centers At 500 RPM 40000 lbs (18180 Kg)
At 100 RPM 32560 lbs (14800 Kg)
At 500 RPM 20020 lbs (9100 Kg)
Power Existing
Additional Press-in center-in chuck, feedrate range .1 to 150 inches per minute, tailstock quill travel 18 in (457.2 mm), carriage length on ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick change slide tool holder, ways re-ground.
Condition Excellent