Used Manual Lathes

American 4025-31 engine lathe | 46" x 396" 1978 Swing Over Bed: 46 1/2" Swing Over Carriage Wings: 44" Swing... Year(s) : 1978 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

ALFEUCCIO 250 Center height 250 mm. Distance between centers 2.000 mm. Ø on the carriage 320 mm. Ø on the bed... Location : EUROPE (Western and Northern)

Price : On request

Automatic lathe TORNOS R 16 Diameter of work admitted 16.00 mm Max. turning length: with flat cames 80 mm... Location : EUROPE (Western and Northern)

Price : On request

WARNER & SWASEY #3 M-1200 Equipped With: 2Speed Main Motor 1 3/4 Spindle Bore Collet Nose 4 1/2 Square Tool P... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Engine Lathe Sirco PA-20 Single phase 220V/60Hr Between centers 78″ Swing 10″ Spindle bore 3... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

22" x 60" ENGINE LATHE KINGSTON HD2260 New 2004 EQUIPPED WITH: Acu-Rite 2-Axis Digital Readouts, 4" Spindle... Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

ENGINE LATHE KINGSTON HD2660 New 2002 EQUIPPED WITH: Acu-Rite 2-Axis Digital R... Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

25" x 120" ENGINE LATHE with 5.5" BORE TOOLMEX TUR630A New 1996 EQUIPPED WITH: Ne... Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

KINGSTON 29" x 120" MANUAL ENGINE LATHE with 6" BORE Model HB29 New 2008... Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Broadbent Schofield 21" x 120" Belt Lathe Year: 1968 Swing Over Bed............................................ Year(s) : 1968 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Gisholt No.5 Turret Lathe | 5" Bore Swing Over Bed......................................20" Swing Over Cross... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Tos SUS63x3500 2-axles DRO 3-jaw chuck, 4-jaw chuck tool holders 2pcs fixed & 1pc. following steadyrest. Location : EUROPE (Western and Northern)

Price : On request

Weisser Heilbronn, Ø 640 x 3300 mm Distance between centers 3300 mm Swing over bed 640 mm... Location : EUROPE (Western and Northern)

Price : On request

CAZENEUVE HB 500 Height of centers 200 mm Distance between centers 1000 mm Maximum swing over cross-slide... Location : EUROPE (Western and Northern)

Price : On request

Binns and Berry Trident L1000 Gap Bed Lathe x 1500mm Trident L 1000 Swing over Bed:... Location : EUROPE (Western and Northern)

Price : On request

Deep Hole Borer with Retrofitted Electrics Ryazan PT 600198 x 4000mm 2007 Solid boring 30-100mm Trepanning 2... Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

16”x40”cc VICTOR Engine Lathe Model: 1640S... Year(s) : 2014 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

TOVAGLIERI DISTANCE BETWEEN CENTER MM 2000 HEGHT OF CENTER ON BAD MM 250 HEIGHT OF CENTER ON CARRIAGE MM 150... Location : EUROPE (Western and Northern)

Price : On request

Leblond Regal Engine Lathe Regal 15×30 Year 1966 RPM 45-1800 Motor HP 5 Swing 15” Centers 30” Tailstock Mors... Year(s) : 1966 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Leblond Regal Servo Shift 17×60 Swing Over Bed: 17” Distance Between Centers: 60” Spindle Speeds: (12) 38-150... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

SHARP 1440V w/Digital Variable Speed New in 2012 2 Axis Acu-Rite Digital Readout Aloris Tool Post Jacobs C... Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

LeBlond Regal 15×42 Engine Lathe Year 1962 RPM 45-1800 Motor HP 5 Swing 15” Centers 42” Tailstock Morse Taper... Year(s) : 1962 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

American 25" SOC | 45" x 204" BALLSCREWS, 75HP, GE MK Century 550 Control 2014 SWING OVER BED --------------... Year(s) : 2014 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

MORANDO PR 65 CNC Center height 710 mm. Distance between centers 10,000 mm. Ø on the carriage 1.100 mm. Ø on... Location : EUROPE (Western and Northern)

Price : On request

EMCO Turn 332 Newin: 2001 Spindle Ø (tong passage): 32 mm Max. Turning Ø: 140 mm Distance between the spindle... Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request