Ligmatech ZHR 15/XX/LI

The workpiece return enables one-man operation on edge banding machines.
Workpieces coming out of the machine are roller conveyor, which transports the parts to a lifting station promotes.
Via a scissor mechanism the parts are
Upper pressure promoted this to an inclined plane, consisting of roller rails, transports.
On this inclined roller conveyor, the parts slide by their own weight to the Operator back.
The driven roller conveyor is equipped with a turning station the parts coming out
of the machine crosswise rotated by 90 degrees and thus conveyed back longitudinally can.

To support long transverse arriving parts an additional support roller track is attached, which can be folded down when not in use.
Similarly, when not in use, the inclined roller
The return path can be folded vertically upwards, so that the edge banding machine can be can be used manually.
From a machine length > 5,000 mm, the feedback control system an intermediate drive is integrated into the line.
Then the The return path can no longer be folded upwards.

Technical data:
Workpiece dimensions: during rotation crossways/longways:
max. length: 2200 mm 2200 mm
min.: 300 mm 300 mm
max. width: 1000 mm 800 mm
min.: 120 mm 120 mm
Max. thickness: 50 mm 22 mm
Weight max.: 40 kg 30 kg

Part distance: 1000 - 1200 mm 1200 - 1500 mm
Feed speed: infinitely variable 8 - 25 m/min.
operating pressure: 6 bar
Operating voltage: 400 V, 50 Hz
Control voltage: 24 V (according to VDE)