Lower LZ 8

Technical details:
Number of sanding units 8 st.
sanding width 150 mm

Additional information:
Machine can be inspected during production!
Leistomat - Finisch and intermediate leveling machine Löwer LZ 8 for finish sanding (smoothing, defibering and edge breaking)
or intermediate sanding profiled window latch
- Finish and intermediate sanding machine with eight sanding blade aggregates,
2 surface units at the top (synchronism / counter-rotation)
2 surface units below (synchronism / counter-rotation)
4 profile units with angled arrangement top right, bottom right, top left, bottom left, all mating
- linear guidance of all grinding units over Linear ball bearing sets on hardened shafts
- Timed immersion of all in the opposite direction rotating grinding units directly above the incoming
Workpiece edges to avoid looping through the Primer in the front edge area.
By the It is possible to immerse the aggregates deeper in the Be able to deliver profiles.
- Timed replacement of the rotating in synchronism Aggregate
- motor workpiece thickness adjustment of the machine by means of motorized height adjustment via push button
- Display of workpiece thickness via digital display with modern magnetic tape system
- Variable grinding disc speed via frequency converter to adapt the grinding intensity to different
Primers by means of frequency converters 200-1000 rpm
- Workpiece width recognition at the machine infeed with automatic adjustment of the left grinding units to the current workpiece width
- Profile preselection via selector switch on the machine inlet side as well as automatic adjustment of the
Abrasive blade aggregates on the selected profile
- modern PLC control for easy operation of the machine
- Suction connection 5 x 100mm diameter
- Length (body) x width x height (mm): 2600 x 1500 x 1600
Length complete: 3600mm (including roller conveyor with integrated workpiece width recognition)
- Operating voltage 400V, 50Hz, 3P, air connection 6 bar
- CE version

Technical specifications:
Number of sanding units: 8 pcs.
Surface brush width: max. 150 mm
Working height: max. 100 mm
Surface Brush Motor: 0.75 kW
Side brush motor: 0.37 kW
Brush speed: 1380 rpm
Feed motor: 1.1 kW
Feed rate: 4-20 M / min
Feed stepless

Speed ??controller grinding units
Automatic width detection
Digital magnetic tape gauge

Extraction nozzle: 5 x 100 mm
Air requirement: 5 x 565 m3 / h
Minimum air velocity at the connection of the machine: 20 m / s

Dimensions:
Length: 2600 mm
Width: 1480 mm
Height: 1700 mm
Weight: 950 kg

WITH inlet roller conveyor
OPTION: return conveyor consisting of:

Cross conveyor with lifting-lowering device consisting of:
Longitudinal transport track driven 2200 mm
Cross transport driven 1150 mm
Longitudinal transport track driven 2200 mm
Roller conveyor not driven back to the operator