Neumag FDY (CF) / POY extrusion line
EUROPE (Western and Northern)
01 FDY (CF) / POY line for the production of multifilament yarn based on polypropylene - Neumag Extrusion Line - Year 1999, 6 position machine - each position can be set up individually. The Air Quench and diphyl can be adjusted for 3 positions. On each position both FDY (CF) or POY yarn can be produced. 6 threads per position, Standard count (FDY) : 300/80 den, Standard count (POY) : 240/40 den, The speed depends on the concentration of colouring. Extrusion equipment :
• 6 volumetric measuring devices with each 3 components (PP, 2 x masterbatch)
• 6 extruders with a capacity of each 50 kg/hour - 30 L/D, AC, inverter operated
• Diameter of the extruder ca 50 mm
• Drive power ca 22 kW, heating power ca. 4 x 5 kW
• 12 spinning pumps
• 72 spinnerets 145 mm
• 48 spinnerets 300/80 den, cross section : trilobal for FDY
• 24 spinnerets 240/40 den, cross section : round for POY
• 1 Vacuum station for the setup of the temperature for each diphyl line, per 3 positions
• 2 Diphylheaters
• 6 Air Quenches
• Jets - Heberlein and Temco
• 2x2 heated godets, length 300 mm
• Temperature : 140 °C
• 1 cold godet = chrome
• 6 winders with automatic doffing, yarn guided by wings
• cones of 170 mm - maximum diameter of the bobbins = 400 mm
• Fully equipped with a process control system with historical data
Still on the mill floor
Cannot been shown running as it has been taken out of production
all the remaining spares in their stock go along with the installation e.g. 2 complete batchers, etc…
The set up of this installation now is installed using 11 meter.
These are 2 blocks of 3 positions (winders) * 1 block of 3 positions uses 3m60.
Other commenst from seller:
We made on this machine FDY PP yarn from 110 denier up to 450 denier .
We have spinnerets for : F50 delta , F80 delta , F144 delta , F 80 tri , F 40 round , F50 round and F144 round .
The tenacity was from 3.8 cN/tex up to 4.5 cN /tex . elongation from 20 to 30 % .
Al heated godets have a diameter 180 mm and they have a stroke from 400 mm .
We have 2 complete spare winders . 8 Neuamg witrass winders in total .
Al 6 extruders have a capacity from 50 kg/hr . ( Arentz extruders ).
The winding speed is 3300 m/min . the mechanic maximum speed is 4000 m/min .
The maximum bobbin diameter is 400 mm . the weight for each package is 10.5 kg .
The stroke length is 170 mm , paper tubes length 200 mm.”
The inverters are Mitsubishi
the extruder model FR-A240E -22K-EC
spin pumps FR-A044-3.70K-EC
PLC is Mitsubishi
The interface module is model A1SJ71C24
The entrance module is type AJ55TB3
the can bus type profi-bus .