Others Semi-Fill 4, Party-KEG Beer Filling Line
EUROPE (Western and Northern)
Brand: Esau Hueber GmbH
Manufacturer's type Semi-Fill 4
Made in year 2000
Capacity 100-200 kph
Application 5-liter Party KEG filling line
Number of filling stations 4
Product pressure 1.5 - 2.0 bar
Filling temperature > 4-5 C
Voltage 230 V / 50 Hz
Instrument air pressure max 7 bar
CO2 pressure max 8 bar
CIP washing max 120 C / 1.5 bar
The semi automatic party-KEG-filler with 4 filling heads and capacity beginning
from 100 up to 200 keg/h, made by Esau & Hueber GmbH in the year 2000.
The KEG is placed manually onto the filler and lifted by two-hand operation.
A sensor recognizes the arriving of the keg and starts automatically the filling process.
The pre-air valve and the return-air will open.
The keg gets purged with CO2 for approximately 5 seconds
and the air opened simultaneously and the keg will be filled from bottom to top.
A sensor probe – installed into the return-air channel – controls the filling process.
A lamp indicates the finished filling process – the beer valve will be closed.
The return-air valve stays open for a moment to relieve the filling pressure inside the keg
to prevent any spilling when removing the keg from the filling head.
Air, water, beer, cleaning agents, gas and a return gas supplied via valve
and piping systems controlled by Esau Hueber control system.
The design is made of stainless steel frame with a work desk,
on which are arranged lift cylinders and pneumatic switches.
The frame is equipped with support devices to accommodate all the remaining components.
Bottling of beverages produced in the automatic mode.
All other processes are performed manually.
Equipment is good condition and ready to delivery.