Others Spray-Coater with Horizontal Dryer AHK

Functional description:
• Panels enter the spray module
• A sensor detects the board – the spray-gun starts according the sensor
detection and coats the panels
• Coating-cycle starts
• Coating can be adjusted by parameter setting. Coating switches on and of
at the right and left edge.
• Direct extraction of overspray at origin
• Automatic cleaning device for transport-system
• Coating cycle is done in 90° angle to the throughfeed-direction. The spray
gun is driven by a servo-motor.
• Coating thickness can be controlled via one parameter (manual or fully
automatic via software

Technical data:
• Maximum Panel – width: 650 mm
• Minimum Panel – width: 300 mm
• Maximum Panel – thickness: 10 mm
• Minimum Panel – thickness: 0,8 mm
• Transport speed: 0,4 – 1,0 m / min
• Intake air (per Module) 800m3/h
• Exhaust air (per Module) 2000m3/h
• Compressed air (per Module) 400 NL / min
• Electrical supply 3 Ph, 400V – 50Hz
• Electrical power (per Module) 12 kW / h

Dimensions:
• Width: 1.600 mm
• Height: 2.216 mm
• Length Centering-Feeder 1.200 mm
• Length Infeed Spray-module 800 mm
• Length Spray-module top: 2.000 mm
• Length Spray-module bottom: 2.000 mm
• Total length: 6.000 mm