Collmann, Rasch Hollow figure line

Complete production line consisting of:
Type of product to be cut:
(Maximum product dimensions)
max. product dimension loaf:
diameter: 980 mm
height: 280 mm
max. product dimension: block
Length: up to 800 mm
Width: up to 800 mm
Height: up to 280 mm
(only possible with block cutting equipment)
Cutting mode:
1) Segments:
The automatic turn table is designed for fully automatic cutting of a cheese
loaf into segments (wedges).
Dividing: the used cutting principle allows only diagonal cutting of a cheese
loaf and so the dividing number is always an even number.
2) Cheese bars:
Cutting cheese bars out of block or cheese loaf.
(cutting of cheese blocks: block cutting equipment is needed)
3) Portion cutting:
The cut cheese bars must be turned by 90°and lay down on the cutting surface.
After this procedure the product is ready for portion cutting
(changing of the cutting width).
Machine configuration:
safety panels, machine coverings and the switch cabinet are Production Facility:

1. Agitator Tank WALTER WERNLI
The double-walled tank with a capacity of approx. 4,000 liters is heated using screw-in heating elements.

2. Progressive Cavity Pump NETZSCH Type NM031SH02S12H
Year of Manufacture: 1999.

3. Worm-Type Tempering Machine SOLLICH Type UT-500-F
Year of Manufacture: 03/1984.

4. Casting Machine COLLMANN Type Hydo-18
Year of Manufacture: 1993.
The machine is equipped with an infeed table and mold preheating. The molds are discharged onto a table after casting.

5. Hollow Figure Spinner COLLMANN Type HS-20
Year of Manufacture: 1993.
Equipped with triple magnets and centering mandrel. Wooden side covers are still installed.

6. Hollow Figure Spinner COLLMANN Type HS-20
Equipped with triple magnets and centering mandrel. Wooden side covers are still installed.

7. Hollow Figure Spinner COLLMANN Type HS-20
Equipped with triple magnets and centering mandrel. Wooden side covers are still installed.

8. Cooling Room
With a single spiral cooler by COLLMANN and two heat exchangers with fans.

9. Transport Line COLLMANN
With pusher chain.

10. Casting Machine HACOS Type MDS-1D-32
Year of Manufacture: 01/2013.
Stainless steel version with dosing pistons (6?) mounted on one side and L-bore cylinders for suction and pressure stages.

11. Casting Machine BÖHNKE & LUCKAU Type BL-SBD-400
Year of Manufacture: 11/2013.
Equipped with SIEMENS touch panel.

12. Cooling Room
With double paternoster cooling system by COLLMANN.

13. Cross Conveyor Belt
Approx. 300 mm working width and 6 meters in length.
Painted version with side guides for the molds.

14. Mold Conveyor Belt
With 4 product feeders leading to RASCH foil-wrapping machines.
Belt system approx. 12 meters long; conveyor belt not yet installed.

Packaging:

15. Foil-Wrapping Machine RASCH Type RU-EA2
Year of Manufacture: 09/1984.
Equipped with Type RU41, Machine No. 130024, Year: 09/1984.
Features bottom folding, double rotation station, single roll holder, and protective cover.

16. Foil-Wrapping Machine RASCH Type RU-EA2
Year of Manufacture: 02/1987.
Equipped with Type RU41/5R, Year: 02/1987.
Features bottom folding, double rotation station, single roll holder, and protective cover.

17. Foil-Wrapping Machine RASCH Type RU-EA2
Year of Manufacture: 07/1991.
Equipped with Type RU41/5R, Year: 07/1991.
Features bottom folding, front fold unit, single roll holder, and partially installed protective cover.

18. Foil-Wrapping Machine RASCH Type RU-EA2
Year of Manufacture: 07/1991.
Equipped with Type RU41/5R, Year: 07/1991.
Features bottom folding, front fold unit, single roll holder, and partially installed protective cover.