Reimelt RS7E-S Rotary Sifter System

Used Reimelt RS7E-S rotary Sifter System

Reimelt – sifters are used for the gentle removal of foreign objects
and coarse materials in an automated system.

Reimelt, with over 100 years of experience, offers dependable
and safely functioning units used to protect down-stream equipment,
loosen up product, fractionation and control sifting. When used as an in-line sifter,
it can be connected directly into the pressure or vacuum conveying line
for a pressure-tight operation of up to 0,8 bar.

Areas of application in the food, chemical, plastics processing and pharmaceutical industries,
as well as for small and large-scale bakeries as: Pre-sifter before silos or in bag dump stations
After-sifter under hoppers In-line sifter for pressure-tight operations (up to 0,8 bar pressure and vacuum)
in pneumatic conveying systems

Manufacturer: Reiment GmbH ( Germany )
Type: RS 7 E S
Year: 2004
Weight 220 kg
Motor performance 1,1 / 1,5 / 2,2 kW
Motor rotational speed (depending on product) 56...705 1/min
Inner bearing ∅, (inlet/ cover) 75 / 50 mm
Direction of rotation of the shaft (viewed from lid) Clockwise
Sifter screen material PE, PA/ Stainless steel frame
Mesh size 400.... 6000 µm
Number of sifter segments 1
Sifter inside diameter 360 mm
Sifter length 790 mm
Sifter surface area 0,715 m2
Pre-sifter drum material 1.4301
Pre-sifter drum perforation 8mm
Number of safety limit switches 2
Operating pressure - Air purge system 3 bar (Laval nozzle)
Air consumption - Bearing purge system 7 Nm3/h
Air consumption - Sifter drum purge system 4,5 Nm3/h
Max. pressure 0,8 bar
Pressure loss by DD application 50 to 100 mbar
Operating noise level depending on product and capacity 62 to 76 dB (A)
Coarse material container 8 Liter

Compact, stabile, low vibration construction of stainless steel 1.4301 and aluminium,
which operates according to the proven rotation principle and designed for a long service life with higher performance.

Problem-free cleaning, simple control and removal of the coarse materials.
Easily controlled and exchangeable sifter screen.
Feeding screw and beater bars are equipped with double-bearings
and sealed from the product area through additional sealing rings.
The sifter screens are constructed from Polyester or Polyamid.
Machine housing and innercomponents in stainless steel Inlet housing and lid in cast aluminium alloy
Direct-driven screw shaft by flanged motor Segmented pre-sifter drum, bearing air purge and side inspection opening.