Rema FX 500

Rema FX 500 with controlled split and saw blade up/down/tilt. Length stops with 2 digital/LED longitudinal stops.
The FX500 from REMA is characterized by its strong construction and extensive saw parameter.
The saw can handle saw blades in diameter from 300 to 450 with a maximum saw height
of up to 150mm and the split width is 1400 mm as standard.
The entire saw -of -the -cast iron saw with a factory warranty of 15 years.
The saw simplifies the work through a quick, simple and precise setting of your saw parameters.
Highest stiffness in the machine structure, which is only used in the most exclusive class saws.

“Vigorous stable machine very affordable”
There are machines from Rema on the market that have been in operation
for about 30-40 years and that are still doing very well.
-The weight of the machine reflects the construction.
-Vitala parts in strong cast iron, workbench, spider house, sawdust, engine brackets etc.
-The whole cradle in cast iron with a factory warranty of 15 years
- 416 mm wide adjusting table with a sled running on 4 round steel with a hardness of 60 HRC.
The adjusting table is also stabilized via 12 eccentric wheels.
-A machine to trust in all situations for a very long time.

Equipment included:
Hanging control panel for controlling the location of the split
Saw blade up /down /tilt motor operation with digital (LED)
Telescope with digital (LED) long -term stops
Start/stop (wireless) on the front of the adjusting table
Automatic Yd Start
RITS ACCOUNT Own engine independent operation from the main blade
Standard saw blade
Rear stop
Extension table behind the cast work table.
Roller support on the end of the left output
Miter
Displacement handle placed beside the adjusting table
Service tool

Technology Data:
Saw length 3200mm with adjusting table (3200mm)
The work table in cast iron 705x1500mm
Max saw height with 450mm blade 150 mm
Max saw height at 45 degrees 105mm
SUVA protection hanging on arm with built -in chip draft
Adjustment tables are available in size: 2500-3200-3900x416mm which runs on 4 hardened steel guides 60 HRC3010 mm
Split width 1400mm
Main motor 6 kW, 8 hp
Draw motor 0.75 kW, 1 hp
Power 400 volts, 50 Hz, 3 phase

Other technical data:
Saw blade 300-450 mm in diam
Drawings 120-130 mm in diam
Saw spider 30 mm in diam
Saw spider rotation speed 3500/4500/6000 V/min
Rits spindle 20 mm in diam
Rits spindle rotational speed 8500
Saw blade adjustable 90-46 degrees
Chipsticks 80/125 mm, suvas protection, sawdust
Total required extraction capacity 1260 m3/h
Air Speed 28m/sec
Weight 1400 kg
Machine Size with 3200mm adjusting table 3700-4400x3900 + with maximum extracted length stop 500 (length x widthmm)