Used General Saws

8.5 HP 23.2 A 230 V Weight 998 kg Dimensions 120 × 36 × 48 in Location : AMERICA North (USA-Canada-Mexico)

Price : On request

MULTICO SC3 Wall Saw Blade size 250mm / 10" Bore 30mm Spindle Speed 3000rpm Motor 2hp / 3ph Depth of... Location : EUROPE (Western and Northern)

Price : On request

Scoring unit Engine power: 5,5 KW cutting height max. 90/45°: 133 mm / 94 mm Adjustment cutting height: electr... Year(s) : 2015 Location : EUROPE (Western and Northern)

Price : On request

Brand : Ayza Mızrak Circular Saw Tilt Angle: 0 ° -45 ° Plotter Motor Power: 1 hp (0.75 kW) Dust Suction Conne... Location : MIDDLE EAST

Price : On request

Hydraulic - lift - lower - swivel 45° tiltable Slide length 3200 mm Cutting width right of the blade1050 mm Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

Motor voltage: 400 V (50Hz) Engine power: 7.5 HP (5.5 kW) Weight : ca.820 kg Suction connection: 120/80 mm sli... Year(s) : 2014 Location : EUROPE (Western and Northern)

Price : On request

Location : EUROPE (Western and Northern)

Price : On request

Cutting height 145 mm Saw blade -ø 450 mm Saw shaft diameter-ø 30 mm Table size 685 x 1200 mm Cutting width to... Location : EUROPE (Western and Northern)

Price : On request

Performed with: Saw carriage with length 3200 mm Max. saw blade diameter 450 mm (When using the scoring unit,... Location : EUROPE (Western and Northern)

Price : On request

Tiltable: Yes, up to 45 ° Power: 5.5 kW Scoring zipper: Yes, 0.75 kW Rolling carriage: 3200 mm Cutting width:... Location : EUROPE (Western and Northern)

Price : On request

Emergency stop and door switch Location : EUROPE (Western and Northern)

Price : On request

Saw carriage: 1,600 mm Cutting width: 1,000 mm Engine power: 5.5 hp Front zipper: Yes, 0.5 hp Max. saw blade:... Location : EUROPE (Western and Northern)

Price : On request

5.5 kw engine Max diameter of the disc with a wedge 400 mm (without a wedge 450 mm) Tilting 0-45 ' large, mass... Location : EUROPE (Central and Eastern)

Price : On request

4 kw main engine podcinak on a separate engine 1.5 kw Max blade diameter 400 mm Raising, lowering the saw side... Location : EUROPE (Central and Eastern)

Price : On request

5.5 kw engine tilting 0-45 ' max diameter of the blade 450 mm 150 cm sliding table lifting saw lowering. conne... Location : EUROPE (Central and Eastern)

Price : On request

. Aluminum carriage flush with the blade, length: 3800 mm. . Support width of the carriage: 380 mm. . Tilting... Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

Technical data and configuration: Max. Clamping height milling spindle 145 mm Milling spindle Ø 30 mm 3000/600... Location : EUROPE (Western and Northern)

Price : On request

Sliding table Large rip fence Run off table 3 phase Location : EUROPE (Western and Northern)

Price : On request

Size 10" Location : AMERICA North (USA-Canada-Mexico)

Price : On request

BLADE D. 550 ELECTRONIC POSITIONER LOAD MT 6 EXHAUST MT 9 WITH 03 STATIONS Location : EUROPE (Western and Northern)

Price : On request

3hp 1phase Biesemeyer 24" fence with Holz Her Type ETZ 3/4hp 3phase 3 roll Power feeder Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Trimming length: 3,200 mm, Max. Cutting height at 90/45 °: 140/97 mm, Cutting width with rip fence: 1,270 mm,... Location : EUROPE (Western and Northern)

Price : On request

- sliding carriage: 2800 mm - hydraulic height and swivel adjustment - parallel cutting width 1,250 mm - 5.5 K... Year(s) : 1985 Location : EUROPE (Western and Northern)

Price : On request

Sliding table length: 3300 mm cutting width at the fence: 1050 mm cutting width at the cross cut: 3200 mm c... Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

Sliding table length: 3400 mm cutting width at the fence: 1300 mm cutting width at the cross cut: 3200 mm c... Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request