SCM LAB 300 PLUS c-11

MULTI-OPERATION COMBINATION MACHINE
CAPACITIES & COMPOSITION:
1) Saw:
- Ripping length: 1660 mm
- End-cutting capacity:
- Maximum cutting width with parallel guide: 800 mm
- Blade rotation speed: 3500 rpm
- Tilting blades: 90° to 45°

Maximum cutting height at 90°: 100 mm & at 45°: 79 mm
- Saw blades: Ø 315 mm, Bore Ø 30 mm
- Scoring blade: Ø 120 mm, Bore Ø 20 mm
- Scoring blade rotation speed: 8000 rpm
- Sliding aluminum carriage 1600 x 270 mm flush with the blade, with handle

Graduated and tilting cross slide with reversible stop and eccentric clamp
- Cast iron table/spindle moulder dimensions: 1020 mm x 325 mm

2) Jointer:
- Working width 300 mm
- Minimum/maximum working height (planer) 3 to 220 mm
- Maximum depth of cut 3 mm
- Cast iron worktable, height 86 cm

Length 1300 mm
Noise-reducing lips
- Tilting fence 0 to 45°: x h.mm
- Planer feed speed: 7 m/min

3) Planer:
- Planing table (L x W) 450 x 300 mm Manual fine adjustment
- Planing thickness 4 to 220 mm
- Minimum planing length 120 mm
- Helical (steel) infeed and smooth (steel) outfeed pressure rollers
- Feed speed 7 m/min
- 72 mm diameter shaft, 3 standard HSS knives 300 x 30 x 3 mm
- Rotation speed 5200 rpm

4) Mortiser:
- 380 x 207 mm cast iron mortising table
- Longitudinal travel (x) 100 mm
- Transverse travel (y) 120 mm
- Vertical adjustment (z) 75 mm
- Max. chuck diameter 16 mm

5) Spindle moulder:
- Spindle moulder spindle: 30 mm diameter x 100 mm working height
- Spindle moulder rotation speeds 3500 / 7500 / 10000 rpm
- 1020 x 325 mm cast iron table (W x D)
With clearance Complete with table washers (plates)
Tool clearance in the table: Ø180 x h.40 mm
- Router hood with wooden side panels and protector
Tool compatible with standard guide: max Ø180 mm
- Work cover with tool spindle: max Ø180 mm

6) Tenoner:
- Protective hood for tenoning and table
Tenning tool: max 275 mm

OTHER FEATURES:
- 400V power supply. Three-phase 50Hz
- Planer/Thicknesser/Mortiser motor 2.2 kW
- Saw motor 2.2 kW
- Spindle moulder motor 2.2 kW
- Dust extraction: 1 x Ø120 + 1 x Ø60 (saw) / 1 x Ø120 (spindle moulder) / 1 x Ø120 (planer)
Recommended air flow: 2300 m³/h
- CE marking, lockable disconnect switch, front/rear emergency stop buttons
Dimensions in working order (W x D x H): 2793 x 1800 x 1150 mm
Dimensions for transport: 1950 x 1800 x 1150 mm
Weight: 457 kg