SCM ROUTECH R 400 5-axis

SCM ROUTECH R400 - OVER with 2 parallel tables
Dimensions of the work tables 2 tables of 2,120 x 3,120 mm
Large model, with separate tables
Special speed of the Z axis = 600 instead of the standard according to the drawings approved by you and in your possession
The table is more easily accessible for loading and unloading and,
in models with 2 independent motors in the X axis, offers an optimal range for each milling motor.
(no limitation of the milling range when individual programs run independently)

- Max travel of the milling motor table X = 7,385 mm
- Max travel of the Y table = 4,490 mm
- Vertical travel Z = 600 mm
- Maximum passage height from the table 500 mm
- Opening between the two tables 1,630 mm.
- Distance between tool holder and table from -10 to 590 mm
Minimum distance between milling motors
2 milling motors with tool changer 520 mm,
2 milling motors with tool changer 375 mm
Installation area 10,000 x 8,820 mm
2 independent X-axes for milling motors
This allows 2 motors to work in parallel and simultaneously at a programmable distance, on the same table or on both tables.
It is also possible to run completely different programs on both tables at the same time.
2 x 5-axis Prisma T milling motor from 13kW(S1)-15 kW (S6)
The interpolating SCM PRISMA T 5-axis milling motor, the heart of the machine, was developed and manufactured by the SCM GROUP motor department, which has many years of experience in building milling motors.
This compact and highly reliable 5-axis PRISMA T device can be used universally
and can utilize the entire work area thanks to its compact design and well-thought-out suspension.
The milling motor can tilt up to -10° from the vertical position and then rotate by 640°
This SCM motor is liquid-cooled and reaches its maximum output of 13 kW (S1) at just 7,000 rpm.
Technical description of the electrospindle

Power and torque:
Maximum power (S1 operation): 13 kW at 7000 rpm
Maximum torque (S1 operation): 17.7 Nm
Power consumption (S1 operation): 32.8 A
Voltage and speed:
Nominal voltage: 380 V
Number of poles: 4
Maximum speed: 18,000 rpm
Direction of rotation: clockwise and counterclockwise (CW - CCW)
Tool connection and bearing:
Tool connection: HSK 63E
High-precision ceramic angular contact ball bearings for high speeds and precision

Cooling and sensors:
Liquid cooling using a heat exchanger for efficient heat dissipation
Integrated sensors for tool locking (S1) and spindle rotation (S3)

Pneumatic connections:
Tool release: E6 6 bar
Compressed air supply: E6 6 bar
Cone cleaning: E4 6 bar
Weight: 35 KG

With this saw blade diameter and a speed of 7,000 revolutions per minute,
you have the full 13 kW of power available when sawing, which is ideal for cutting hard solid wood.

Specifications:
Motor power 13 kW (17.6 HP) at 7,000 rpm (S1)
Tool holder HSK-63-E

This new tool holder type has the same diameter but a longer taper contact surface than the F version.
It is tightened with 1,800 kgf (equivalent to 1765 NM) instead of 1,200 kg (equivalent to 1176 NM).
This significantly increases stability with large and long tools.

- Milling spindle speed continuously adjustable between 1,000-18,000 rpm.
- Robust, one-piece cast iron construction, for maximum installation precision of the internal components and good heat dissipation
- Static frequency converter for stepless speed and quick stop of the tool.
- Left and right rotation of the spindle.
- Thermostatic sensor to monitor the operating temperature Liquid cooling
- Safety lock with sensors for: Checking that the spindle is at a standstill before changing the tool Locking and unlocking the tools
- Maintenance-free ceramic high-precision bearings with a long service life
- Dust protection hood with central outlet and automatic valve control
for optimal dust extraction from the milling group and the drilling unit in both 3-axis and 5-axis work.reach beyond the table

Includes 2x Rapid 12 magazine on board next to Prisma T motor
- Is mounted directly next to the milling unit and moves in the X and Y directions.
- Tool magazine with 12 positions for HSK-63-E adapter
- Axis distance 2 consecutive tool positions 88 mm
- Maximum weight per tool 8 kg
- Maximum total weight of tools 36 kg
- Maximum permissible diameter 230 mm

2 x drilling group F 18 with 12 vertical and 6 horizontal drills
Is mounted next to the milling unit.
All drills, both vertical and horizontal, have a reach beyond the table
When drilling, the milling motor can rotate the tools in the Rapid 12

Technical data:
- Power
- Continuously adjustable speed of the drilling group
- Mounting of vertical drills
- Mounting of horizontal drills
- 12 vertical drills with center distance
- 2+2 horizontal drilling in X direction
- 1+1 horizontal drilling in Y direction

2.2 kW (3 HP)
2,000 to 6,000 rpm
M10/ dia. 11 mm.
M 8/ dia. 9 mm.
32mm
64mm

The minimum distance between the 5-axis units with F18 and Rapid 12 is 1080 mm.
12 reference stops on the outside of the table.
Movable Ni profile on the table side
2 tables, each divided into 4 vacuum zones of +-/ 1,000 x 1,500 mm
There are 2 vacuum start buttons on the longest sides of each table.
The front will also have the start buttons for the front panels
This makes it possible to vacuum the workpieces per zone instead of blocking them per table.

2 x 6 stops = 12 stops in the tables
Each table has 6 stops
2 x cooling for aluminum or light alloys
Specially for applications where the tool is cooled either with compressed air only or with a mixture of oil and compressed air to machine aluminum or other light alloys.

The nebulizer is activated with M codes
The oil consumption is minimal, so no recovery system is required.
2 vacuum pumps, each with 250 cbm/h delivery capacity (5.5 kw)

Technical data:
- Power; 250 m3/h
- Motor power 5.5 kW
max. vacuum generated: 0.9 bar
2 x equipment for corner units
Reference system with spring-loaded ball for backlash-free positioning of angle units in the 5-axis milling motor.

Extension of the control for machines with more than 8 CNC axes
The basic control can control up to 6 axes, if exceeded this NUM control option must be added.
Total axes = X1; X2; Y1,Y2,Z1,Z2,B1,B2,C1,C2 = 10 axes
It is possible to use both motors one after the other to machine the same workpiece.
Working in parallel with both motors on the same table or on separate tables is possible.
- It is possible to use the two motors to perform different jobs simultaneously on each of the tables.
2x sensor for measuring tool length and plate thickness