Seydelmann K124H AC-8 Vac. Cutter

6 continuously variable, pre-programmable blade speeds
2 reverse mixing speeds
2 independent bowl speeds
stainless steel vacuum and noise-reduction cover,
hydraulically operated
with transparent feed hatch
largely made of solid stainless steel
the heavy machine housing, made of solid
stainless steel, provides maximum noise insulation.
a solid, stainless steel partition completely separates the
bowl chamber from the motor compartment.
the front panel features 2 large, easily accessible
cleaning openings
120-liter stainless steel bowl
400 volts, 3-phase, 50 Hz – control voltage 230 volts
main motor for three-phase current, IP55, 80 kW power
thermal overload protection
built-in fan
standstill heater for the motor windings
electric brake
control panel with cross-lever switch
frequency converter with intelligent output
current monitoring,
inrush-current-free and capable of handling overloads
up to 1.8 times the rated current
stainless steel control cabinet with built-in main switch,
approx. 10 m of control and motor cables between the
machine and the control cabinet,
the preprogrammable cutter shaft speeds—from slow
mixing speed
to the highest fine-chopping speed—can be selected on the
cutter via a lever switch
“command 1500” microprocessor-controlled digital
display and control unit
stainless steel housing, IP66 rated, mounted on the wall
behind the machine
up to 5 m connection cable to the machine

features:
stepless programming of the speeds for all
blade speeds, ranging from mixing speed to maximum speed
adjustable automatic shut-off when either
the temperature or time limit is reached
display of blade shaft speeds and corresponding gear ratios
display of temperature and time values with preselected shutdown values for each,
plus an indication of whether these respective shutdown values have been activated
display of bowl speeds and the corresponding gear ratio for each
display of actual vacuum values and programmed vacuum setpoints
service indicator for temperature sensor failure and motor overload

recessed covers
noise insulation on the stand base
enclosed underside of the stand with ventilation and exhaust
hydraulic cutter cover
2-speed bowl drive motor, approx. 3.7/4 kW

basic hydraulic unit consisting of:
1.5 kW motor, pump, valves, and one cylinder each for raising and
lowering the cutter lid and the product ejector

vacuum system:
stainless steel main lid, hydraulically operated
120 m3 vacuum water ring pump with electric motor
very small vacuum chamber, resulting in short evacuation times
includes hydraulic loading device, integrated on the left
includes ejector, hydraulic, on the right
includes S24 blade system
with 6 Type V blades