Speedline MPM Accela

Vintage : JUN 2005
Under Stencil Cleaner
230v 1 Phase 3.5kva 50/60Hz

Specifications ( See Details above for installed options )
BOARD HANDLING
Maximum Board Size (X x Y)
558 mm x 508 mm or (22” x 20”)

Minimum Board Size (Y x X)
50.8 mm x 50.8 mm or (2” x 2”)

Board Thickness
0.152 mm (0.006") to 12.7 mm (0.500"), excluding warpage tolerance

Maximum Board Weight
7 kg (15 lb)

Board Edge Clearance
Configurable to 3 mm (0.120") or 5 mm (0.200")

Maximum Underside Clearance
25 mm (1.0")

Transport Speed
8 mm/sec to 1270 mm/sec or (0.3"/sec to 50"/sec)

Transport Height From Floor
813 mm to 1041 mm
(32" to 41")

Transport Track Feed Direction
Left-Right, Right-Left,
Right-Right, Left-Left

Conveyor Length
Choice of 1416 mm (55.7"),
1727 mm (68"),
or 2048 mm (80.6")

Board Hold-Down
Integrated y-snuggers, top
clamps (software-enabled),
underside centernest
vacuum, venturi vacuum

Board Support Methods
Magnetic pins and blocks
standard, dedicated
workholders and
Gel-Flex optional

PRINT PARAMETERS
Maximum Print Area (X x Y)
558 mm x 508 mm or (22" x 20")

Snap-off
-0.025 mm to 12.7 mm
(-0.001" to 0.500")

Print Speed
6 mm/sec to 305 mm/ sec
(0.25"/sec to 12"/sec)

Print Force
0.4 kg to 22 kg
(0.9 lb to 50 lb)

Print Stroke
±280 mm (±11") from center

Stencil Frame Size
737 mm x 737 mm
(29" x 29") adjustable to 584mm x 584 mm
(23" x 23") for tubular frames.
Optional stencil frame adapter for cast frames.

VISION
Vision Field-of-View (FOV)
10.6 mm x 8.0 mm
(0.417" x 0.315")

Fiducial Types
Standard shape fiducials
(see SMEMA standards),
pad/aperture

Camera System
Single camera — patented
look up/down vision

PERFORMANCE
Total System Alignment
±12.5 microns

Accuracy and Repeatability
(±0.0005") at 6 sigma,
Cpk of greater than or equal to 2.0*
Qualification is performed using production environment
process variables; print speed, table lift and camera
movement are included in the capability figure.

Wet Print Deposit
±25 microns

Accuracy and Repeatability
(±0.001") at 6 sigma,
Cpk of greater than or equal to 2.0*
Based upon actual wet printing with positional accuracy
and repeatability verified by a 3rd party measurement
system.

Cycle Time
Less than 5.5 sec

FACILITIES
Power Requirements
200 to 240 V AC (±10%) single phase @ 50/60Hz, 15A

Air Supply Requirements
100 psi at 4 cfm (standard run mode) to 18 cfm
(vacuum wipe)
(6.89 bar @ 1.9 L/s to 8.5
L/s), 12.7 mm (0.5”)
diameter line

Height (excluding light tower)
1950 mm (76.7") max at tallest board load height

Depth
2169 mm (85.4")

Conveyor Width
Choice of 1416 mm (55.7"),
1727 mm (68"),
or 2048 mm (80.6")

Cover Width
1357 mm (53.4")

Front and Rear Clearance
432 mm (17")

Minimum Machine Weight
2205 kg (4850 lb)

Crated Weight
2722 kg (5990 lb