Thermo Forma Steri-Cult 3311 CO2 Incubator

Perform large-scale cultivation with high contamination control
with these stackable Thermo Scientific Forma Steri-Cult CO2 incubators.
This incubator combines the most advanced components
available in a single unit: CO2 sensor,
precise microprocessor controls, active humidity control,
HEPA air filtration and high temperature decontamination capability.
Integral high temperature sterilization function at 140°C,
14 hours duration. Optimized airflow system does not interfere
with samples or incubator function. In-chamber HEPA air
filtration continuously removes particles for Class 100 quality conditions.
On-demand sterilization cycle at 140°C eliminates
contamination from internal surfaces.
An audible alarm activates if the outer door is opened
during the cycle or if the temperature reaches 60°C or more.
An access code prevents accidental start of the cycle.
Message center with alphanumeric display clearly shows temperature,
CO2 and relative humidity. Audible/visual alarms
with mute button. Set points for temperature,
over temperature, CO2 and relative humidity.
Configurable audible ON/OFF, access code,
HEPA filter change indicator, remote alarm contacts,
tracking temperature low and high and CO2 and relative humidity alarms.
Temperature range: Ambient +5°C to 50°C.
Relative humidity: 95%, controllable.
Humidity source: External humidity reservoir.
CO2 concentration range: 0 to 20%. CO2 sensor technology:
IR sensor. Capacity: 322. 8 L. Chamber material:
Polished stainless steel. Internal dimensions (DxWxH): 523 x 732 x 838 mm.
Dimensions (DxWxH): 686 x 1092 x 1002 mm