Traub TRAUB TX 8 F6 8000 rpm TNL 16 2 Axis

Z1-axis travel (headstock stroke usable): 200 mm
Rapid traverse speed: 15 m/min
Path speed: 6 m/min
Feed force: 2500 N
Ball screw diameter x pitch: 25 x 5 mm
C-axis input/output freedom: 0.001/0.01 degrees
Control model: TRAUB TX 8 F6
Control processor: 32-bit
Number of CPUs: 1
Programming: EIA and ISO code
Input/output freedom Z/X diameter axes: 1 μm or 0.0001 inch
Rapid traverse (control performance at 0.001 mm resolution): max 15 m/min
Track speed: max 6 m/min
Fine interpolation act and measuring circuit cycle: every 0.37 ms
Largest thread pitch: 999.999 mm
Largest radius: 99999.999 mm
Feed override: 0-200%
Rapid traverse override: 0-100%
Speed override: 50-120%
Storage capacity: 32000
Tool compensation pairs: 40
Maximum rod passage: 16 (20) mm
Maximum part length: 500 mm
Bore diameter of front spindle bearing: 40 mm
Bore diameter of rear spindle bearing: 30 mm
Collet type: Schaublin F20/76-87
Quality of round material: Ø Xh9 mm (DIN 671)
Spindle speed: 200–8000 rpm
Drive power: 2.8 kW
Drive power at 25% ED: 4.4 kW
Constant power range: 1:5.3
Maximum torque at 25% duty cycle: 28 Nm
Maximum turning length with fixed guide bush: 200 mm
Maximum turning length with driven guide bush: 170 mm
Maximum turning length with bar gripper: 170 mm
Guide bush type: Neukomm B39001
Hydraulics pump motor drive power: 0.75 kW
Hydraulics flow rate adjustable: 16 l/min
Hydraulics container capacity: 40 liters
Hydraulics system pressure: 40 bar
Cooling lubrication container capacity: 150 liters
Cooling lubrication pumps: 2
Cooling lubrication flow rate at 3 bar pressure loss: 25 l/min
Cooling lubrication pump drive power: 1.1 kW
Connected load: 18 kW
Spindle height above floor: 1050 mm
Machine dimensions (LxDxH without chip conveyor): 2385 x 1590 x 1625 mm
Machine weight without counter spindle: 2650 kg
Machine weight with counter spindle: 2800 kg