AMERICA North (USA-Canada-Mexico)
Wave Soldering Machine
Serial # 9909101101
3 x 400 Volts
Vitronics Soltec AlphaWave 6651 Wave Soldering System
Comes with manuals. New or Like new. Has solder in it, not sure what kind though. Has the accessories seen in the pictures.
The AlphaWave soldering system is designed and built only for wave soldering printed circuit boards.
Safety features provides safe operating / working conditions for both the operator / maintenance-man and the machine.
Area of Application
The 6651 AlphaWave is an off-line automatic wave soldering machine, designed to solder printed circuit boards with through-hole and/or SMT components. PCB's are transported on adapted metal carriers by a carrier conveyor system over the fluxing station, the preheat zone and the solderpot at one uniform velocity.
Length: Min. 50 mm or 2.0 inch, Max. 320 mm or 12.6 inch
Width: Min. 50 mm or 2.0 inch, Max. 320 mm or 11.8 inch
Component Height: Max. 100 mm or 4.54 inch
Lead Length: Max. 8 mm or 0.31 inch
Board Thickness For Standard Carrier: Max. 3 mm or 0.12 inch
Power Supply: 400 V, 50/60 Hz, 3 phase, max 12 kW
Pneumatics: 3 bar (42 PSI)
Exhaust Requirements: 1200 M3 (42.5 FT3/HR)
Foam Fluxer Specifications:
Max. Foam Height: 10 mm (0.4inch)(depending on flux type)
Air Consumption Foam Fluxer: Adjustable with scale, max. is 17 liter/min (0.60 CFM)
Air Consumption Air Knife: Adkistab;e, max is 160 liter/min (5.65 CFM). Activation aireknife via tracking system
Stone Material: VYON FF
Stone Porosity: 35 micron
Compressed Air Control Unit: Standard
Air Compressor: Not included
Heating Length: 1 x 0.7 meter, seperate set-point and closed loop control on element temperature. Preheater has disposable alu-foil.
Element Type: Calrod element, self-cleaning, long wave length IR
Heating Power: Total = 7 kW, PID controlled
Heating Distribution: Guiding plates to focus hot air convection for even heat distribution
Top Side Covers: Standard over the total heating zone
Wave Types: Smart Wave
Wave Width Standard: 300 mm (11.8 inch)
Max. Height of Main Wave: Approx. 8mm (0.31 inch)
Solderpot Capacity: Approx. 150 Kg (331 Lb)
Heat-up Time of Solder Bath: Approx. 2.5 hours to reach 250 degrees c (482 degrees F) for eutectic 63/37 solder, by 3 heating elements (1 kW each) attached outside the solder pot
Transport Carrier Conveyor Specifications:
Speed: Adjustable till 2 m/min (6.5 ft/min)
Conveyor Angle: Adjustable between 6 and 7.5 degrees