Wehrmann Combima /K/I/R80/1260/V

Single-sided direct postforming machine for curved caravan fronts

Technical data:
A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction.
For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material.
The laminate protruding for the postforming process is located in the machine
on the underside of the workpiece and is formed from the bottom to the top.

Technical data "Machine"
Constant workpiece projection
from the chain conveyor: from approx. 35 mm
Throughput width min.: 130 mm ( only for straight parts )
Workpiece length in feed direction min.: 1,000 mm
Basic height: 940 mm (upper edge of chain conveyor)

The workpiece is transported by means of the R75 precision roller chain with height-adjustable top pressure. upper pressure.
The low-maintenance precision roller chain has 75 mm wide and 85 mm long rubber-coated chains.
Due to the 80 mm wide compound V-belt of the top pressure the workpieces are reliably guided.
Special version of the top pressure for fitting to different workpiece radius.
Left-hand machine: fence side left in machining direction

1 fence ruler on the fixed machine side
Feed speed: max. V=6-30 m/min.
Mains voltage: 3/N/PE, 400/230 V, 50 Hz,
Control voltage: 24 V DC / 230 V AC
Top pressure: motorised height adjustment
Release agent via spray nozzle from above

Front of stand: [/b]
Pre-milling unit swivelled approx. 3 degrees with 1 horizontal motor, 400 V, 12.5 KW

[u]Stand rear side:
Pre-finishing/milling unit with 1 motor horizontal, 400 V, 12,5 KW

Front side of upright:
Relief cutting for internal profiles with 1 motor horizontal 400 V, 6,6 KW

Rear side of upright:
Milling unit for internal profiles with 1 horizontal motor 400 V, 6.6 KW

Front side of upright:
Flattener swivelled approx. 120 degrees with 1 horizontal motor 400 V, 6.6 KW

Rear side of upright:
Radius milling approx. 100 degrees swivelled with 1 motor horizontal 400 V, 6,6 KW

Pointing unit with 1 motor hanging 400 V, 1 KW, HSK 25
Free space
Heating zone

PU glue application of the "gusset bead" in the Spotting area
By means of NORDSON - drum melter
PU-glue application onto the surface
Lubricant spraying device from below
Profile pressure section with firmly mounted glide shoes for 2 profiles
Cooling zone via glide shoe technology
Air on/off control

Cleaning via spray nozzle from below
Fibre unit 08.055 from above with one motor 660 W, 400 V, 200 Hz
Buffing unit from above
2 grooving units
Part support with a double roller rail -rubberised-

Postfolding
Aggregate for bevelling 08.0587
With 1 motor for fine milling from above

Aggregate for bevelling 08.0587
With 1 motor for fine milling from above
With 1 motor for fine milling from above

Aggregate for bevelling 08.0587
With 1 motor for fine milling from above
With 1 motor for fine milling from above

2 Nordson bead application heads
1 Nordson PUR flushing system