Weinig Powermat 700

Working width: 20-230 mm
Working height: 10-160 mm

Spindle arrangement:
Bottom: 2 pieces
Right: 1 piece
Left: 1 piece
Top: 2 pieces

Technical data:
Working width 20 - 230 mm (with tool flight circle 93 - 125 mm)
Working height 10 - 160 mm (with tool flight circle 93 - 125 mm)

1. spindle
First lower horizontal spindle
Motor 11 KW
Diameter 40 mm
Speed 6,000 rpm
Tool flight circle 125 - 145 mm
Tool groove circle rebate cutter 130-160 mm
Axial adjustment travel 17 mm
Folding device, including rebate cutter
MarathonCoating for table insert in front of 1st lower spindle
Electronic digital display for radial adjustment

2. spindle
First right vertical spindle
Motor 7.5 KW
Diameter 40 mm
Speed 7,000 rpm

Tool flight circle 40 mm below table level 93 - 200 mm
Tool flight circle 80 mm below table level 93 - 180 mm
Tool flight circle for straight cutterheads max. 180 mm
Max. Tool diameter behind stop plane 180 mm
Maximum moulding depth 35 mm
Axial adjustment travel 80 mm

Stop lip after the right-hand spindle with quick adjustment
Pressure roller from above opposite the right-hand spindle, swivelling away and pneumatic.

3. spindle
First left vertical spindle
Motor 7.5 KW
Diameter 40 mm
Speed 7,000 rpm

Tool flight circle 40 mm below table level 93 - 200 mm
Tool flight circle 80 mm below table level 93 - 180 mm
Tool flight circle for straight cutterheads max. 180 mm
Maximum moulding depth 35 mm
Axial adjustment travel 80 mm

Easily removable suction hose
Two lateral pressure rollers in front of the left spindle, travelling and spring-mounted
Pressure roller from above opposite the left-hand spindle, swivelling and pneumatic
Adjustment travel of the feed rollers opposite the left-hand spindle, axial 35 mm
Radial CNC-controlled adjustment and positioning of the tool holders
in conjunction with the memory function or PowerCom

4. spindle
First upper horizontal spindle
Motor 11 KW
Diameter 40 mm
Speed 7,000 rpm

Tool flight circle 93 - 200 mm
Tool flight circle for straight cutterheads max. 180 mm
Maximum moulding depth 35 mm
Axial adjustment travel 40 mm

Split pressure shoe in front of upper spindle with horizontal adjustment plane,
Adjustable to tool flight circle and swivelling away from the tool, pneumatic

Pressure shoe before and after the upper spindle with electronic digital displays, integrated in the memory function or the PowerCom
Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom

5. spindle
Second upper horizontal spindle
Motor 7.5 KW
Diameter 40 mm
Speed 7,000 rpm

Tool flight circle 93 - 200 mm
Tool flight circle for straight cutterheads max. 180 mm
Maximum moulding depth 35 mm
Axial adjustment travel 40 mm

Split pressure shoe in front of upper spindle with horizontal adjustment plane,
Adjustable to tool flight circle and swivelling away from the tool, pneumatic

Pressure shoe before and after the upper spindle with electronic digital displays, integrated in the memory function or the PowerCom.
Upper spindle prepared for subsequent attachment of the cassette system
Radial CNC-controlled adjustment and positioning of the tool holders in conjunction with the memory function or PowerCom

6. spindle
Second lower horizontal spindle
Motor 7.5 KW
Diameter 40 mm
Speed 7,000 rpm

Tool flight circle 93 - 200 mm
Axial adjustment range 40 mm

Radial adjustment travel
Planing:
min. Tool diameter at table level 93 mm
Max. moulding depth (tool Ø 200 mm) 15 mm
Max. cutting edge projection above table level and behind fence level 10 mm

Sawing (only in conjunction with wood insert):
max. saw cut height (saw Ø 200 mm, flange Ø 100 mm) 40 mm
Max. cutting height (saw Ø 200 mm, flange Ø 90 mm) 45 mm

Spindles in general
All spindles with high concentricity.

Optimised chip flow thanks to improved flow technology on the extraction hoods

Feed system
Electronic feed incl. brake, infinitely variable 5 - 40 m/min.
Motor 7 kW
Feed roller in front of 1st lower tool pneumatically controlled high-low
All feed rollers with quick adjustment
Durofer pointed-tooth rollers with depth limiter and self-cleaning

CNC-controlled adjustment and positioning of the feed up/down
in conjunction with the memory function or PowerCom.

Machine electrics
Operating voltage 400 Volt (voltage range 380 x 420 Volt), 50 Hz
All spindle motors in IE 3 design

Machine stand, table and stops
Dressing table 2 m long (incl. joining ruler)
Side pressure roller on infeed table, spring-mounted

MarathonCoating for machine table and stops (without infeed table and special table tops).
Special coating to protect the table tops and stops from excessive wear.
For the processing of abrasive materials (e.g. tropical woods, MDF, chipboard).

Manual lubricant pump for table resin removal, incl. 5 litres of lubricant
One driven hardened steel roller in the machine table 200 mm wide
One driven rubber roller in the outfeed table, or in front of the universal spindle (if available), spring-loaded 50 mm wide

Pressure elements and guides
Guide rail after left spindle, 6 mm thick, not travelling, manually height-adjustable

Machine operation
Memory Plus
Large touch panel for the machine control for better readability and easier operation.
Basic equipment for the installation of CNC-controlled adjustment and positioning
Lubrication points for axial spindle adjustment
Centralised position of lubrication points at the front of the machine

Safety and sound insulation:
Machine including spindle brakes
Electromagnetic locking of the safety hood
(only after the tools have come to a standstill, approx. 15 sec, the bonnet can be opened)
Full safety panelling

Easily liftable safety bonnet with window covers the entire
covers the entire working area and protects against mechanical mechanical hazards.
When the safety bonnet is raised, the tool holders and feed are and feed are automatically switched off.
With the CE version, it is not possible to open the safety bonnet during opening the safety hood during automatic operation is not possible.