Weinig UNIMAT 23 E

TRIMMER-PROFILER with 6 tool holders 120 x 230
- Standards: EC

Features of this WEINIG UNIMAT 23 E moulder:
- Machining width / height capacities: 230 x 120 mm.
- Entrance table: 2500 mm.
- 6 tool-holder shafts Ø: 40 mm.
- Spindle rotation speed: 6,000 rpm.
- Motorized adjustment of working width and height.
- all the settings brought back to the front, accessible with the hood closed
- Each of the settings is provided with a SIKO digital counter.
- Enveloping and soundproofing cover, with large panoramic window.

Composition :
- 1. Lower horizontal shaft: 5.5 KW (7.5 hp)
- 2. 1st right spinning top
- 3. Left spindle moulder, joint motor with TD: 7.5 KW (10 hp)
- 4. 2nd right spindle moulder: 5.5 KW (7.5 hp)
- 5. Upper horizontal shaft: 7.5 KW (10 hp)
- 6. Lower horizontal shaft: 7.5 KW (10 hp)

Coaching :
- Pneumatic presser with pressure adjustment in 3 separate zones.
- Cardan drive and toothed metal rollers Ø 140 mm.
- 2 driving rollers integrated in the table.
- Entry pressure roller lifting control (retraction).
- "Short parts" pack with additional drive rollers in front of each of the spinning tops.
- Drive gear motor power: 2.2 KW (3 hp).
- Speed variator from: 5 to 24 m/min.

Machine delivered with:
- 2 CENTROLOCK tool holders (with disposable reversible irons) 210 mm long / Ø 125 mm.
- 2 CENTROLOCK tool holders (with disposable reversible irons) 130 mm long / Ø 125 mm.
- Sets of double bell wrenches for tightening tools.
- Technical manual, electrical and pneumatic plans, list of spare parts.

General informations :
- Voltage: 380 v three-phase. 50Hz
- Total installed power: 42 KW
- Suction: 6 Ø 140 mm outside.
- dimensions: 4700 x 1850 x h.1650 mm.
- Estimated weight: 4,000 Kg.