Weinig Univar 10/3

Folding machine
Machine will be cleaned and chcked before delivery
For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm
Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes.
The available tool positions are selected using a selector switch on the control panel retrieved.

Machine with 3 hydraulically controlled right precision
Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle
The spindle stroke takes place in a U-movement, so that the opening is possible for short parts
The milling stop remains as small as possible. Spindle stroke horizontally fine
Adjustable for both tool positions from the operator side.
Central lubrication for the spindle units.

The 1.
Spindle can be selected in right-left rotation.

This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood.
Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts.
Excavation of the first 7 transport rollers using Footswitch.
This shortens the lead time.
An additional The support rail also allows large-format frames to be milled around.

Continuous, chainless rubber roller feed with extreme short roller spacing.
Height adjustment of the feed bar electrically readable.
Electrical version according to VDE.
Machine including operating tools, but without processing tools tools.

Technical data:
Working width min. 40 mm
Working height min. 30 mm, max. 100 mm

1. Profiling spindle (synchronous and counter-rotation)
Motor strength lifting spindle 11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50 mm
Clamping length 285 mm
Tool zero flight circle 112 - 140 mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm for 3 tools
Basic position under table 10 mm (adjustable up to 20 mm)
Spindle stroke horizontal 80 mm with synchronous automatic immersion

2. Profiling spindle
Motor strength lifting spindle 11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50 mm
Clamping length 285 mm
Tool zero flight circle 112 - 140 mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm for 3 tools
Basic position under table 10 mm (adjustable up to 20 mm)
Spindle stroke horizontal 80 mm

3. Profiling spindle
Motor strength lifting spindle 11.0 kW
Spindle speed 6000 rpm
Spindle diameter 50 mm
Clamping length 285 mm
Tool zero flight circle 112 - 140 mm
Max. tool - D : 232 mm
Spindle stroke vertical 2 x 95 mm for 3 tools
Basic position under table 10 mm (adjustable up to 20 mm)
Spindle stroke horizontal 80 mm

4. Profile spindle - fitting unit on the right
For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile.
Pneumatic horizontal movement with Selector switch in the control panel.
Motor 2.2 KW
Speed 6,000 rpm
Spindle diameter 40 mm
Clamping height 125 mm, 2 tools
Tool flight circle min. 140 mm, max. 180 mm

Motor power feed 1.1 kW
Feed speed 6 - 12 m/min.
Feed rollers - D : 95 mm
Feed roller width 50/30 mm
Feed roller spacing 100/120 mm

Screen control with 150 programs. 1 program is each 1 individual part and includes 2 end profiles and 1 longitudinal profile. Pro programs are for end processing
20 different profiles can be selected for Longitudinal machining of 40 different profiles 1 can be selected (in turning mode 2).
When manufacturing, e.g. a frame, up to 8 different programs (parts) can be saved.
The program memory can be organized so that up to 18 frames or sashes with a maximum of 8 parts each can be stored.

Manufacturing options:
- Individual parts
- Double parts
- frame by frame
- in series
- Milling
Data entry via keyboard with integrated Operator guidance and error diagnosis.