Willis 5000VS (MICROCUT) Vertical 3600 RPM

WILLIS 5000VS (MICROCUT)
Year 1992

Equipped With
SPECIFICATIONS: TABLE DIMENSIONS ------------------- 59 in X 11.8 in
TRAVELS-LONGITUDINAL/CROSS (MANUAL)- 47 in X 15 in
VERTICAL KNEE TRAVEL --------------- 20 in
T-SLOTS (3) ------------------------ 5/8 in
RAM TRAVEL ------------------------- 20 in
RAM SWIVEL ------------------------- 360 DEGREES
QUILL DIAMETER --------------------- 4-1/8 in
QUILL TRAVEL ----------------------- 6 in
SPINDLE MOTOR ---------------------- 5 H.P.
SPINDLE SPEEDS (VARIABLE) ---------- 60 - 3600 RPM
SPINDLE TAPER ---------------------- NTB 40 TAPER
QUILL POWER FEED RATES ------------- 0.0032 in , 0.0017 in ,
0.0053 in
(INCH PER REVOLUTION)
HEAD TILTING-LEFT TO RIGHT (DEGREES) 90 - 0 - 90
HEAD TILTING-FRONT TO BACK (DEGREES) FIXED
SPINDLE NOSE TO TABLE-MIN./MAX. ---- 0 in - 20 in
CENTER OF SPINDLE TO COLUMN FACE --- 7 in - 29 in (MIN./MAX.)
GROUND WAY SURFACE WIDTH ----------- 3-15/16 in
SADDLE WIDTH ----------------------- 33-1/4 in
KNEE WIDTH ------------------------- 15-1/2 in
KNEE HEIGHT ------------------------ 19 in
LONGITUDINAL POWER FEED ------------ (12) 1 in - 28 in PER MIN.
LONGITUDINAL RAPID TRAVERSE -------- 94 IPM
LONGITUDINAL FEED MOTOR ------------ 2 H.P.
TABLE RISING MOTOR ----------------- 2 H.P.
COOLANT PUMP ----------------------- 1/8 H.P.
NET WEIGHT ------------------------- 4,950 LBS.
MAXIMUM WORK PIECE WEIGHT (CENTERED) 1,650 LBS.
MACHINE DIMENSIONS ----------------- 84 in X 62 in X 95 in EQUIPPED WITH: - 5 H.P. MOTOR, 220 VOLT