Wolverine 10-inch Dredge 10-inch (250 mm)

Hull compartments3
Hull side and deck thickness10 gauge (3.57 mm)
Hull bottom thickness3/16” (4.7 mm)
Ladder construction3”x3”x3/16” angle iron with 7 gauge (4.55 mm) gussets

Cutterhead inside diameter27" (686 mm)
Cutterhead outside diameter32" (813 mm)
Cutterhead design6 smooth blades

Prime moverCaterpillar C13 ACERT diesel engine
Engine power440 bhp (328 bkW)
Dredge pumpMetso Minerals Thomas Simplicity #J30
Nominal flow rate3,800 GPM (863 m³/hr) @ 200 ft H₂O (61 m H₂O)

Spuds2
Spud diameter8-5/8” (219 mm)
Spud length30’ (9.4 m)
Length overall with ladder68-ft (20.7 m)

Hull length50-ft (15.2 m)
Hull width11’-6” (3.5 m)
Hull depth4-ft (1.2 m)

Overall height for trucking10-ft (3.1 m)
Total dry weight58,000 lbs (26,309 kg)
Diesel fuel capacity500 gal (1,893 liters)
Maximum dredging depth25-ft (7.6 m)
Ladder length33-ft (10 m)

Winch pull capacity4,500 lb (20 kN)
Winch wire diameter3/8” (10 mm)
Winch wire length150-ft (45.7 m)

Includes new pump
Includes new spare cutting head
Approximately 500 yards of pipeline
Includes many floats
Thermofusion (pipe welding) equipment in great condition