YRJK61200 CI Flexo Press 6
EUROPE (Central and Eastern)
Remark: Print material thickness, width should match with setting tension.
ors： 6 colors
Register precision: ±0.10mm
Printing repeat length： 400-800mm
Dycril plate and double faced
Max. mechanical speed： 250m/min
Running speed： 15-200 m/min，
Actual speed influenced by below factors:
Printing plate perimeter
Printing material Max. Substrate width: 1270mm Printing width： 1250mm Printing col
Substrate： Paper: 30---300 gsm
adhesive tape option together: 1.14+0.55mm Remark: Sleeve system
Ink and solvent
Printing typography and quality
Web direction: Print unit on the right side of rewind unit
(stand in operation side to observe web direction)
Ink type: Water based ink, alcohols based ink and
solvent based ink.
Driven method: Gear drive
Register control: Manually operation
Power: AC400V ±5% ，50Hz
Max. unwind and
rewind diameter: φ1200mm (1000Kg)
Splice method: Stop and manual splice
Heating & drying system: Electrical heating
temperature: 10-35 ℃
Relative humidity: 30-80%（20℃ as reference temperature）
Compressed air: No lubrication, drying and wipe off humidity
Air pressure: 6Bar
Dew point : +2℃
Filter: less than 20μ
Water income temperature (cooling Total motor power: 70KW (usually use 65%) Electrical heating pipe power: 90KW Max. Noise: Lower than 85dB Suggestion operation
roller, temperature +20℃)：from 15-18℃
Hardness (CaCO3): 2.5-4mg/L
Tension control range: 4～20kgf/ full web
Machine color: RAL3020 (red)+RAL7035 (grey)
Remark: Only for HUAYANG provided main machine.
(Length×Width×Height): See attached drawing.
Remark: No included height of user provided exhaust pipes.
3. Function units
3.1 Unwind unit
Hydraulic swing arm unwinder.
Unwinding by air shaft: φ76mm (3”) or φ150mm (6”); Max. l
3.2 Infeed unit
Consists of steel roller and rubber roller.
Steel roll is driven by vector frequency motor.(Yaskawa close loop frequency system, 4KW)
When printing unit start running, driving roller move with printing unit.
Press on/off of rubber roller is controlled pneumatically.
Splice platform. oading: 1300kg; Max. unwind diameter: φ1300mm Paper roll can be adjusted laterally by the handwheel on the operation side. Automatic magnetic particle brake for tension control. Capacity: 200N.M Tension controller: China made.
3.3 Printing unit