Used Plastic Machinery

Shred-Tech Dual Shaft Shredder with Infeed Conveyor Model: ST-50 (2) 25 HP Motors 1 1/4" Blades 40" x 40" Hopp Location : AMERICA North (USA-Canada-Mexico)

Price : On request

60 HP Untha Quad Shaft Shredder (2) 30 HP 1 New Motor Opening Size 28" x 30" 1" Width Blades (2) Screens / 1" Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw diameter 105 mm Clamping force 15.000 kN Daylight between platens max 3.250 mm Distance between tie-bars Year(s) : 2015 Location : ASIA (North East)

Price : On request

Voltage 460V Shot Size 16.9 oz. Clamping Force 237 US Ton Tie Bar Spacing 24" x 24" Screw diameter: 56mm Contr Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Voltage 460V Shot Size 9.6 oz. Clamping Force 200 US Ton Tie Bar Spacing 20.9" x 20.9" - New nozzle body and e Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Voltage 200VAC Machine Size 450-750 Ton Controller: STEC-480 Vertical stroke: 59.1" / 1500 mm Crosswise strok Year(s) : 2014 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Feeding: Frontal. Feed hopper: Hinged with manual tilt control. Rotor diameter: mm 420 Rotor speed: rpm 430 Di Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Roll automatons forming and punching separately Condition Very good Condition Hours 76000 3 stations Thermofo Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

Year: 2005 (cold part) Year: 2015 (hot part) Hot part for the production of the film FFS blowing film equipped Year(s) : 2005, 2015 Location : EUROPE (Western and Northern)

Price : On request

Shot size: 362 oz Tie bar spacing: 45.3" x 37.4" Platen size: 66.1" x 58.1" Max. Open daylight: 96.02" Control Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Gala Model 32.5BF Spin Dryer (Low Noise) 50,000 LBS/HR Pellet Rate 5,000 LBS/HR Flake Rate 300 GPM Water Ra Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5" Davis Standard Model 35V Extruder, Water Cooled, 100 HP 17.39:1 Davis Standard Gearbox Rated For 257 HP W Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6" Wide Cumberland 6 Pelletizer Rotor Type In-Feed Height Discharge Height Motor Drive On Casters Electric Location : AMERICA North (USA-Canada-Mexico)

Price : On request

50" x 27.5" American Baler, Model 5029H10T25F. Autotie 50" x 27.5" Feed Opening Dual 30 hp Motors 30" x 43" Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Drive Type Hydraulic Tonnage 350 Voltage 480v Control CC300 Clamp Type 2-Platen Specifications Coming Soon 3- Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity 400 Ton Shot Size 42.9 OZ Tie Bar Spacing 28.9" x 28.9" Platen Size 41.5" x 41.5" Max Daylight 52" Mi Year(s) : 2016 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity 397 Ton Shot Size 18.4 oz Tie Bar Spacing 31.9" x 29.9" Platen Size 44.5" x 42.5" Clamp Stroke 25.6" Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity 110 Ton Shot Size 3.59 oz Min /Max Mold Height 11.81"/15.74" Max Daylight 26.77" Max Mold Size 18.11" Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4 layers (3 + recovery extruder) Extruder A red: Model:ES 100-30 Screw diameter: 100 (L/D) 30 Motor power: 156 Year(s) : 2005 Location : EUROPE (Western and Northern)

Price : On request

Illig RDKP 72k 3 Station Thermoformer (approx 40 working hours) Forming area with actuated clamping frame max. Year(s) : 2023 Location : EUROPE (Western and Northern)

Price : On request

Vertical Stroke (Y-Axis) 800mm Traverse Stroke (Z-Axis) 2000mm Kick Stroke (X-Axis) 800mm Payload 26.5lbs Elec Year(s) : 2019 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type: 10 HP Casters: Yes Starter: Yes Feed: 10" x 12" Additional Information: Sound dampening enclosure. Year(s) : 1980 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Reciprocating extruder screw Head: 6 up milk jug Parison Programming: none Extruder: 3.5" air cooled Controls: Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Vertical Stroke (Y-Axis) 800mm Traverse Stroke (Z-Axis) 2000mm Kick Stroke (X-Axis) 800mm Payload 26.5lbs Elec Year(s) : 2019 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity 110 Ton Shot Size 3.4 oz Tie Bar Spacing 16.14" x 16.14" Platen Size 22.83" x 22.83" Min /Max Mold He Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request