Menu

Used PM Newsprint/ P & W/ Graphic, Specialty paper/ Fine Paper

28 results
1
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Voith 3030 mm 190 tpd Graphic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production... Year(s) : 1970 Location : -

Price : On request

More details  
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Price On request

More details
1
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Voith 3030 mm 190 tpd Graphic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production... Year(s) : 1970 Location : -

Price : On request

More details  
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Price On request

More details
1
Voith Graphic paper machine 3030 mm 45 - 60 gsm 150-190 tpd

Used 3030 mm Graphic paper machine 150-190 tpd max. drive speed: 1.000 m/min Operating width: 303 cm Product... Location : EUROPE (Central and Eastern)

Price : On request

More details  
1
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Voith 3030 mm 190 tpd Graphic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production... Year(s) : 1970 Location : -

Price : On request

More details  
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Price On request

More details
1
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Voith 3030 mm 190 tpd Graphic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production... Year(s) : 1970 Location : -

Price : On request

More details  
Voith Graphic paper machine 3030 mm 45 - 60 g/m² Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme: Book printing paper- offset-papers, woodfree and wood containing 45 - 60 g/m² Daily production: 150 - 190 t/d Electr. tension: 230 / 400 V, 50 Hz Yom 1970 WITH OVERHAULINGS DETAILED SPECIFICATION;: HEADBOX: Manufacturer: : high turbulence headbox Voith Type: W 7500 Year of manufacturing: 1983 Speed of machine: max. 1.000 m/min Outlet width: 3.300 mm Wire width: 3.400 mm Throughput: 15.030 – 24.740 l/min Stock consistency: 0,7 - 1,2 % Damping vessel: d = 500 mm x 1.200 mm WIRE SECTION: Manufacturer: Cantilever - Make Wire section: 3.440 mm Wire length: 38.200 mm length Dewatering zone: 16.650 mm (in the middle of the breast roll - SSW) Dewatering elements: Breast roll: D = 600 mm x 3.550 mm BL Wire suction roll: D = 820 mm x 3.550 mm BL Foil boxes: 2 pieces with 3 foils 3 pieces with 6 foils 6 pieces with 1 foil 2 pieces with 5 foils Flat suction box: 4 pieces with 8 foils 1 piece with 9 foils 1 piece with 6 foils Wire guide roll: 5 pieces with D = 280 mm x 3550 mm BL Wire tension: 2 pieces automatically operated D = 420 mm Wire guide: 1 piece pneumatic WIRE SECTION FORMER: Manufacturer: Cantilever Wire section: 3.480 mm Wire length: 11.800 mm Dewatering zone: 1.090 mm (3 zones) Dewatering elements: Infeed roll: D = 680 mm x 3.560 mm BL Outlet roll (motor – driven): D = 680 mm x 3.560 mm BL Flat suction box: 3 pieces (zone 1, 2 3) 1.090 mm x 3644 mm Wire tension: 1 piece automatically operated D = 420 mm x 3.540 mm Wire guide: 1 piece pneumatic D = 420 mm x 3.540 mm PRESS SECTION: 1st and 2nd press •Manufacturer : compact press Voith •Pick up roll: D = 800mm x 3.450 mm BL •Centre roll: D = 1.250 mm x 3.400 mm BL ceramic-roll •S-roll (3rd roll): D = 691 mm x 3.400 mm rubber covering 1st felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces D with 10 mm slot •Felt dimensions : 3.400 x 17.000 mm •Nip pressure 1st nip : 70 N/cm, 1 hydraulic-aggregate 2nd felt •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot•Felt dimensions: 3.400 x 16.200 mm •Nip pressure 1st nip: 80 N/cm, 1 hydraulic-aggregate 3rd press Manufacturer : Laying press Upper roll : D = 1.229 mm x mm 3.400 mm BL ceramic-roll Bottom S - roll : D = 490 mm x 3.400 mm BL rubber covering •Felt guide rolls : 8 pieces D = 280 mm x 3.550 mm BL •Felt tension : 1 automatically operated felt guide, pneumatically operated •Suction pipe: 2 pieces with 10 mm slot •Felt dimensions : 3.400 x 16.200 mm •Nip pressure: 90 N/cm, 1 hydraulic-aggregate S-roll (Küsters) CALENDER: Manufacturer : Küsters (with 2 rolls) Year of manufacturing : 1982 installed at MW Upper roll : D = 470 mm x 3.150 mm BL Soft - roll Bottom roll : D = 613 mm x 3.200 mm BL steel – roll coated (driven) Nip pressure : 100 N / cm Hydraulic aggregate REEL UP: •Year of manufacturing: 1982 installed at MW •Pope reel: D = 895 mm x 3.100 mm BL •Reel spool : D = 360 mm x 3226 mm BL •Number of reel spools : 12 pieces •Operating aggregate : 1 hydraulic aggregate 1 control desk DRIVE PIECES: •Drive system : Multidrive – System •DC – Drives (Siemens): Press – section to 5th dry-group, calender, pope Siemens Modulpac C (1982) •AC – Drives (ABB): wire – section, 6th to 8th dry-group ABB Multidrive (2001) RENOVATIONS AND MODIFICATIONS: ►1978 QCS AccuRay 1180 ►1978 upgrading 2nd press ►1981 New reel - spool - crane 10t ►1982/83 New Headbox, size press, final dryer section ►1982/83 approach - flow system with a speed-controlled mixing pump ►1982/83 coating color preperation for the size-press ►1985 Äquitherm - roll for calender ►1985 Infrared - heater after size - press ►1987/88 New winder Jagenberg Vari Step ►1987 Modification 1. + 2. dry - group ►1988 upgrading Multidrive to 800 m/min ►1989/90 upgrading dry - cylinder with thermo-rings ►1991 new guiderolls in the dryer - section ►1993 online - colour measurement ►1995 Drive - controller mixing - pump ►1996 Former, upgrading approach - flow system, 2 mixing - pump system ►1996 upgrading calender to soft - nip ►1997 cd - controll system thickness and moisture ►1997 new hydraulic - system end section ►1999 optimizing Former (wire changing) ►1999 New QCS with Calcoil - system for cd - controll thickness ►1999 new rope - guiding dry - section ►1999 central grease lubrication ►1999 steam moistener press section ►2000 upgrading steam - condensate system ►2000 removing 6th dry - group, integration 6th dry - group ►2001 new drive - controllsystem 7th and 8th dry - group ►2002 retention - measurement ►2004 upgrading Prorun - system, new Sprinkler - system ►2005 web - inspection system ABB ►2010 moistener end - section (reduction curl) IBS

Price On request

More details
4
Voith SC Paper machine 3930 mm 38 – 100 gsm 150 t / day

3930 mm Voith SC Paper Machine 575 m/min Rebuilt: 1979, 1996, 2000, 2009, 2011 Capacity... Year(s) : 1979, 1996, 2000, 2009, 2011 Location : EUROPE (Central and Eastern)

Price : On request

More details  
0
4500 - 5000mm Slitter Rewinder, dismantled in excellent condition 4500 mm (MG) papers 20-120 g/m2

4500 mm trim Slitter Rewinder Product to be rewinded: one side machine glazed (MG) papers... Location : EUROPE (Central and Eastern)

Price : On request

More details  
0
paper machine 100m/mn 3200 mm 35 - 100 gsm 15 TPD

Second hand / used 3200 mm 15 TPD paper machine MG Yankee cylinder Max. speed 100m/min GSM 35 - 100g/m² Ca... Location : EUROPE (Central and Eastern)

Price : On request

More details  
10
Beloit Paper machine 750 m/ mn incl. size press, calender 5500 mm

Used 5500 mm trim Beloit Paper Machine incl size press , calender Trim width: 5.500 mm Speed: 750 m/min Appro... Location : EUROPE (Western and Northern)

Price : On request

More details  
9
KMW, Metso, Valmet Paper Machine 5500 mm 40-80 gsm SC paper 350 TPD

KMW 5500 mm 350 TPD 1000 m/mn Medium-Fine Paper Machine Manufacturer KMW ( valmet / Metso ) Manufacturing Y... Year(s) : 1982 Location : EUROPE (Western and Northern)

Price : On request

More details  
22
Paper Machine for specialty papers 2200 mm 60 to 500 gsm/ 1500 gsm 22 TPD

Complete 2200 mm Paper Machine for specialty papers incl stock preparation Net paper width at pope: 2200 mm... Year(s) : 1, 1994 Location : EUROPE (Western and Northern)

Price : On request

More details  
4
Beloit Fourdrinier Paper Machine 5600 mm

Used Beloit 5600 mm Fourdrinier Paper Machine Year of manufacture: 1972 Operating Speed: 850 m/min Balance... Year(s) : 1, 1993 Location : EUROPE (Western and Northern)

Price : On request

More details  
0
paper machine 3870 mm 40-60 gsm 130 tpd

used 3870 mm paper machine: MF 48 cylinders Max. speed 570m/min GSM 40 - 60g/m² Capacity: approx. 130t/day Location : EUROPE (Central and Eastern)

Price : On request

More details  
1
Voith Grafic paper machine 3030 mm 45 - 60 gsm 150 - 190 t/d

Voith 3030 mm Grafic paper machine max. drive speed: 1.000 m/min Operating width: 303 cm Production programme... Year(s) : 1, 1981, 1982, 1983, 1985, 1987, 1988, 1989, 1990, 1991, 1993, 1995, 1996, 1997, 1999, 2000, 2001, 2004, 2005, 2010 Location : EUROPE (Central and Eastern)

Price : On request

More details  
6
complete plant to produce 20 Tpd bonded leather 1500 mm thickness: min 0,2 mm - max 3,5 mm 20 TPD

1500 mm net trim Fourdrinier machine / complete plant to produce 0 Tpd bonded leather( 2 x fourdriner ' paper'... Location : EUROPE (Western and Northern)

Price : On request

More details  
6
Voith Fourdrinier paper machine 2.200 MM Copy paper, White & Color papers of 42~150 GSM 60 TPD

2.200 mm Fourdrinier Paper Machine for Copy paper, White & Color papers in basis weight range 42 to 150 gr/m2... Location : AMERICA (Central and South)

Price : On request

More details  
6
Voith P&W & Coating base paper 2.850 mm 54 -250 gsm 150 TPD, Just stopped DEC 2017 !

2.850 mm VOITH Paper machine for Printing & Writing paper grades, & Coating base paper Just stopped DEC 2017... Location : AMERICA (Central and South)

Price : On request

More details  
12
Newsprint paper Machine 4500 mm 36-60 gsm 230 TPD

Used 4500 mm Trimmed Paper Newsprint Machine Year: 1984 Grade: Newsprint Basis weight range: 36-60 gsm Design... Year(s) : 1984 Location : EUROPE (Western and Northern)

Price : On request

More details  
2
Escher Wyss, Maule 4 WIRES COATED BOARD PAPER MACHINE 2600 mm Uncoated or Light Coated board – 270 to 600 gr/m² 190 TPD

4 WIRES COATED BOARD PAPER MACHINE General information: Maule – Escher Wyss Year of construction: 1962 stopp... Year(s) : 1 Location : EUROPE (Western and Northern)

Price : On request

More details  
1
Voith complete Twin-Wire Newsprint or Magazine grades PM 6650mm trim 45 - 70gsm 400 TPD, 1000 m/min

Used Voith complete 6650 mm Twin-Wire 400 TPD Newsprint or Magazine grades of 45 - 70gsm paper machine - voi... Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

More details  
0
Escher Wyss, Sulzer Paper machine, 350 m/mn 2370 mm Offset 60-100 gsm 50-60 TPD

Sulzer Escher Wyss 2370 mm offsert papers 440 m/ mn Main technical data: Manufacturer: Sulzer Escher W... Year(s) : 1, 1991, 1992, 1997, 2011 Location : EUROPE (Central and Eastern)

Price : On request

More details  
9
P&W paper machine 2.200 mm 56-120 gsm 45 TPD

Used 2,200mm, printing & writing 45 TPD PAPER MACHINE, 250m/min, 56-120gsm, Press section: 1st press 60 ps... Location : EUROPE (Central and Eastern)

Price : On request

More details  
0
P&W, packaging grades fourdrinier paper machine 2.570 mm 40-200 gsm 30-60 TPD

2.570 mm P&W, packaging grades paper machine , 40-200 gsm, 30-60 TPD Paper grade: P&W but also packaging grad... Year(s) : 1 Location : EUROPE (Central and Eastern)

Price : On request

More details  
5
Voith WFC paper machine 3600 mm trim 100-318 gsm 120 to 200 tpd

Used 3.600 mm trim VOITH WRITING&PRINTING PAPER MACHINE GENERAL: - Width 3.600 mm trimmed - Paper from 100 t... Year(s) : 1, 2007 Location : EUROPE (Western and Northern)

Price : On request

More details  
3
Allimand, Bellmer Fourdrinier+Multi Dryer 2,650mm at Reel 70GSM 40~140TPD

PM4 : 40~140 ton/day 40~150gsm, width of paper at rell 2,650, working speed 500m/min, publishing printing pap... Location : ASIA (North East)

Price : On request

More details  
1
Beloit Printing & Writing PM 2.300 mm 50-150 gsm 160 TPD

Beloit Printing & Writing PM, 2.300 mm, 50-150 gsm, 160 TPD - YOM 1992. Rebuilt and upgraded in 2005 - The ma... Year(s) : 1992, 2005 Location : EUROPE (Western and Northern)

Price : On request

More details  
9
Others Office graphic white papers PM, BACK ON SALE for small price ! 2200mm 50-220 g/m2 45TPD

2,200mm PAPER MACHINE 45tpd office/graphic paper machine, 1983 make: Papcel HOT DEAL, BACK ON SALE, as buyer h... Year(s) : 1983 Location : EUROPE (Western and Northern)

Price : On request

More details  
3
30 Others SHSC 1760-6800MM 30-350gsm 100

Brand: Sunshining Nipco soft calander Main parameter: 1. Soft calander model: two nips soft calander, 1 nip... Year(s) : 1998 Location : ASIA (China - Taiwan - HKG)

Price : On request

More details  
Create an alert