Used Screw Extruders

DAVIS STD. GEMINI Model GC61 EXTRUDER COMPLETE WITH SCREWS AND BARREL 460 VOLTS 3 PHASE 60 Hz Location : AMERICA North (USA-Canada-Mexico)

Price : On request

DAVIS STANDARD SIZE 8″ RUBBER EXTRUDER Location : AMERICA North (USA-Canada-Mexico)

Price : On request

DAVIS STANDARD 6″ EXTRUDER NON VENTED HAS TEMPERATURE PANEL WITH EUROTHERM PLC CONTROLS 17:1 GEAR BOX 347 hp Location : AMERICA North (USA-Canada-Mexico)

Price : On request

DAVIS STANDARD 2.5″ EXTRUDER 40 hp MOTOR, 24:1 BARREL WITH 5 BARREL ZONES AND 2 DIE ZONES WITH A RELIANCE D Location : AMERICA North (USA-Canada-Mexico)

Price : On request

L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED WATER COOLED (CLOSED LOOP) AND SIDE VENTED BARREL AT A Year(s) : 1987 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Berstorff 8inch (200mm) Cold Feed Pin Extruder Extruder Type: Vac GE 200 SC, Pin Type No of Pins: 2 X10 + 1X12 Location : EUROPE (Western and Northern)

Price : On request

Mild Steel Single Screw 125mm Dia. Mixer Feed 125mm.X 175mm. 125mm.X 175mm. Extruder Feed 75mm.Extruder Head Location : EUROPE (Western and Northern)

Price : On request

Stainless Steel body with Nylon Twin Screws 160mm dia X 1,000mm Long. Fed by 2 Off 110mm dia X 400mm Face C Location : EUROPE (Western and Northern)

Price : On request

Reifenhauser Bitruder BT80 M/S Twin Screw Extruder Mild Steel Twin Screw Counter Rotating Extruder 80mm Dia Location : EUROPE (Western and Northern)

Price : On request

Single Screw Extruder with 32mm dia x 1000mm long auger 24 to 1 ratio with 5 off heated zones with hydraulic Location : EUROPE (Western and Northern)

Price : On request

Type Wx 63mm Dia 22:1 Ratio Long Screw With 3-Stage Electric Heating Jacket To Discharge Plate. Driven By 3/1 Location : EUROPE (Western and Northern)

Price : On request

Machine Brands are: Jumbo Steel Country of Origin: Taiwan Manufacturing Years: 2009, 2009, 2010 and 2010. All Year(s) : 2009, 2010 Location : MIDDLE EAST

Price : On request

Batch size 60L Rear loading type Barrel dia 254mm Ram pressure 210bar Max output 600kg/hour With die face cutt Year(s) : 2017 Location : EUROPE (Western and Northern)

Price : On request

Screw ø 60-30D Approx.300 kg/h Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Screw ø 80-30D Approx. 300-400 kg/h Drive:D.C. motor Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Screw ø 60-25D Approx. 60-80 kg/h Drive:D.C. Motor New control in 2014 Spare screw Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Drive: 5-50 kw Motor speed: 255-2550 U/min Step-down gear: 1 :67,9 Screws Diameter: 90mm Lenght: 20; 23 L/D Location : EUROPE (Western and Northern)

Price : On request

<b>1x AMERICAN KUHNE AK250-A/C-EXT, Low Boy Extruder</b> 2.5″ EXTRUDER 30:1 L/D ELECTRICALLY HEATED AIR COOLE Location : AMERICA North (USA-Canada-Mexico)

Price : On request

<b>1x Davis Standard 35IN35, Extruder </b> 3.5" L/D 28:1 With150 HP Reliance Motor and drive HES upgraded Co Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Power: 64 Kw Screw : L/D: 30 Max. screw speed: 125 min-1 Very good condition With granulation head With ele Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Twin screw extruder Type: BT 400 Note: approx. 100 kg / h Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Type: KME 1-60-30B Range : screw ø 60-30D approx. 300 kg / h Drive: DC motor 100 kW Execution as co-extruder m Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

BANDERASingle screw extruder Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

Twin screw extruder Type: BT 550 Note: approx. 180 kg / h Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

Single screw extruder Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request