Used Screw Extruders

Gloucester Contracool 80mm HG 30:1 extruder helical groove feed throat 200 hp ac motor included 13.86:1 gear b Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Extruder with feed roller - Screw diameter: 90 mm - Screw length: L = 12D - Screw speed approx.: 40 rpm - Moto Location : EUROPE (Western and Northern)

Price : On request

Used rubber extruder line COLMEC extruder, hot air duct, cooling bath Consisting of: COLMEC 70 x 22D extruder Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Rubber Extruder – used - Screw diameter: 60 mm - Screw length approx.: 15D - Sold as inspected. The buyer is r Location : EUROPE (Western and Northern)

Price : On request

Specification: Rubber extruder – used - Screw diameter: 60 mm - Screw length approx.: 11D - New screw - Cylind Location : EUROPE (Western and Northern)

Price : On request

4.5" American Kuhne 450 Extruder, 30:1 LD, Air Cooled, 250 HP 6 Barrel Zones, Air Cooled 8 Downstream Zones 42 Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Gloucester 3 1/2 extruder 24.1 w/ DC motor ( h.p. unknown no plate) could be 75 or 100HP, w/drive and contro Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Diameter Conical 80/156mm Material of Screw 38CrMoAl Rotating Speed (Counter Rotating) 1~36.9 RPM Heating Zone Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Used Cincinnati conical counter rotating twin screw plastic extruder discharge. Nominal 63 mm diameter (2.5″ Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Parallel-running, segmented screws and cylin Year(s) : 2010 Location : EUROPE (Western and Northern)

Price : On request

Capacity: 400 – 700 kg/h Screw diameter: 2 x Ø 61.9 mm Length/D: 32D (extendable to 44D at extra cost) Motor Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Capacity: 1200 – 2000 kg/h Screw diameter: 2 x Ø 130 mm L/D: 3.5D Motor: 5.00 kW Control system: Currently wi Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.5” 24:1 L/D Davis Standard model DS 15 1.5” pedestal extruder having a four (4) zone electrically heated an Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type Screw Single Screw Diameter 30 mm Screw L/D 25 Dimensions (LxWxH) 2.000 x 1.200 x 1.900 mm Weight 560 kG Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Davis Standard model DS 125 pedestal extruder. 1.25″ 24:1 L/D three (3) zone electrically heated and air-cool Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Davis Standard model DS 15 1.5″ pedestal extruder. 24:1 L/D four (4) zone electrically heated and air-cooled Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Ø120 mm 2.2 m screw length With 75 HP motor (55 kW) Without electrical control Location : EUROPE (Western and Northern)

Price : On request

Ø75 mm With electrical control panel 77 kW motor Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

- Ø65 mm - 1.8 m length Without electrical control and without motor Location : EUROPE (Western and Northern)

Price : On request

6" PTI Single Screw Extruder, Model 6000, 30:1 L/D Vented Barrel, Air-Cooled Cooled, 400 HP, New in 2003 7 Ba Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.0" AET Extruder 30:1 L/D Ratio 11:22:1 Gearbox Ratio, Ratio, UNEX 4.1 Gearbox, Belt Driven 75 HP Marathon A Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3.5" HPM Extruder, Model 3.5"" Prodex 30.1 30:1 L/D Ratio, Air Cooled Barrel 13.88:1 L/D Ratio, Flender SZNE 2 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Motor 250 HP AC Motor Drive 250 HP AC Drive L/D 36:1 L/D Ratio Screw 4.5" Barrel 4.5" Motor HP Capacity 400 HP Year(s) : 2010 Location : AMERICA North (USA-Canada-Mexico)

Price : On request