Used Spinning machines (Open End)215 results
456 Rotors SE12 Spin boxes 4 piecers Corolab Yarn Cleaners Waxing Tube Take up 31/33mm Rotor Diameter Year 20... Year(s) : 2007, 2009, 2010 Location : AMERICA North (USA-Canada-Mexico)
360 spindle Uster Quantum cleaner 2 rotor dia T533BD opening roller B174DN connect power Year(s) : 2005 Location : ASIA (China - Taiwan - HKG)
4 x SCHLAFHORST SE 8 /216 SRZ ROTORS UPGRADED TO SE 10 Y.O.C: 1996 MAIN MOTOR WITH FREQUENCY REGULATOR COROLAB... Year(s) : 1996 Location : -
Type ACO 288 with SE 10 spinbox 288 rotors , exit cone 6” Cylindrical Opening Roller type B174 DN 2 piecer a... Year(s) : 1995 Location : EUROPE (Western and Northern)
192 Rotors Waxing Device Exit 6'' 4º 20' Special for Thick Titles BT-902 can do 8Nm – 20Nm Year(s) : 1997 Location : EUROPE (Western and Northern)
360 spindle COROLAB-XQ clearer rotor dia T533BD opening roller 174 one set with waxing Year(s) : 2007 Location : ASIA (China - Taiwan - HKG)
nos. 200 rotors 2 Robots Rotor diameter 48 waxer without clarifiers OS21DN opening roller cone outlet 6 "1 ° 5... Year(s) : 1998 Location : EUROPE (Western and Northern)
No of Rotors 448 Opening Roller Type OK40DN Rotor Type T34DN Type of Spinbox NSB 38 Traverse in mm 152 Conicit... Year(s) : 2017 Location : ASIA (South East)
No of Rotors 540 Yarn Clearer Make Rieter Piecer Carriage 4 Opening Roller Type OB20B Rotor Diameter in mm 31... Year(s) : 2014 Location : ASIA (South East)
No of Rotors 400 Yarn Clearer Make Rieter Measuring Head Type IQ plus Opening Roller Type C40DN Rotor Diameter... Year(s) : 2011 Location : ASIA (South East)
No of Rotors 360 Yarn Clearer Make Rieter Measuring Head Type IQ Plus Opening Roller Type C40DN Rotor Type C53... Year(s) : 2010 Location : ASIA (South East)
O.E spinning frame, 56 rotors, 110 Mm rotor, 8 sections of 7 positions each. 1-RANGE OF COUNTS: Nm 0.8-12 2-... Location : AMERICA North (USA-Canada-Mexico)
-Machine with 400 spindles -2 Combing roller: -Spinning Box SE 10 -Rotor 33-XT5-B-EC -Combing roller: B174 DN... Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)
OE rotor spinning machine 48 positions D130 mm rotors needle opening rollers ceramic nozzle Year(s) : 1985 Location : EUROPE (Western and Northern)
43-54MM ROTOR OVERHEAD CLEANER EACH MACHINE SUITABLE FOR COTTON AND COTTON-PES BLENDING Year(s) : 2012 Location : MIDDLE EAST
ROTOR 264 Year(s) : 1997 Location : MIDDLE EAST
rotor dia 30 mm, 260 rotors, 2 robots Stopped now , on mill floor Year(s) : 2000 Location : EUROPE (Central and Eastern)
No. of Rotors: 240 With Cylindrical Package, 170mm With T34DN Original Kinex Rotor Complete with 3M Germany Cu... Year(s) : 2003 Location : -
No. of Rotors: 416 Rotor size: T34mm With OK40 Combing Roller for Cotton With Corolab yarn clearer With Over... Year(s) : 2011 Location : -
No. of Rotors: 288 Rotor Size: 54mm Tube Take up: 170mm With Opening Roll for Cotton Power Supply: 380V, 50 Hz... Year(s) : 2005 Location : -
No. of Rotors: 240 Rotor Size: T54 Tube Take up: 170mm With Opening Roll for Cotto Power Supply: 380V, 50 Hz. Year(s) : 2007 Location : -
360 spindles Rotor Diam: 33 No robot can size is 1.06m x 0.46m more photos upon request Year(s) : 2008 Location : ASIA (China - Taiwan - HKG)
400 SPINDLES Rotor Diam: 33 No robot can size is 1.06m x 0.46m more photos upon request Year(s) : 2013, 2014 Location : ASIA (China - Taiwan - HKG)
8 Schlafhorst Open End Spinning 2 machines - 168 rotors 6 machines - 240 rotors Schlafhorst ACO240 SE9 1992... Year(s) : 1992, 1993 Location : AMERICA North (USA-Canada-Mexico)
Rotor spinning machine for coarse yarns 48 spinning heads, rotor diam. 130mm opening rollers with needles, cer... Year(s) : 1985 Location : EUROPE (Western and Northern)
You can find used Open End Spinning machines on Wotol
The main manufacturers of Spinning machines (Open End) are Schlafhorst, Rieter, Elitex, Saurer, Trützschler, Savio, Hdb, Ingolstadt, Muratec, Titan, Zinser.
You will find ACO Autocoro SE9, SE10, SE11, SE12, R60, R40, R20, BT903, BT905, BT923, BD200
Open-end spinning is cleaper spinning method where the yarn is twisted by rotating at the hap or break in the flow (the fibers wrap around the yarn vs spinning one long piece of yarn). Open end spinning offerd higher poductivity and less processed than ring spinning method but it gives products with a lower quality with frayed texture and poorer wear resistance. It is also called break spinning or rotor spinning.
Open end technology has been developped in the 30's. Elitex from CZ has developped the first rotor spinning machine running at 30000 rpm with its very well known BD200 model in 1965. The speed has increased rapidely at 100,000 rpm in the mid 70s. Noadays Open End is widely spred as a mass production spinning method.
Questions and answer corner from users
Q: Schlaforst ACO seems to be a very known machine for open-end. I have seen a complete mill with various models. Can you explain the difference?
A: There are 18 SE-9 168 unit frames - non Amsler equipped- 10 with 46 mm rotor and 8 with 40 mm rotor .
There are 10 SE-9 240 unit frames - 9, equipped with Amsler units- 46 mm rotor.
There are 8 SE-10 240 unit frames - non Amsler- 40 mm rotor.
We have enough of the 46 and 40 mm rotors to change them as styles dictated. All the 40 mm rotors are TT grove that we used in filling.
All the 46 mm rotors are U groove that we used in the Warp yarn frames.
There is an extra set of 46 mm TT rotors that we used in the 25P/75C mix- 240 rotors.
All frames have B174 combing rolls ( 100% ) but we have OS21 rings for combination poly/cotton yarns.
The 168 unit frames are 80' in length.
The 240 unit frames are 107' in length ( except Amsler frames, they are 109' because of Amsler control box mounted on top)
The SE10 240 unit frames are 108' in length.
All frames have 2 piecers ( robots ).
No frames have waxing devices.
SE-9 Rotor drive has a 23 kw on 1 end and 35 kw on the other end.
SE-10 Rotor Drive has a 35 kw on both ends.
Combing roll drive motor is 17 kw on both frame types.
All frames have Uster UPG Polyguard clearers.
Q: I want to buy some Schlafhorst SE9, SE10 Open end with 288 spindles how many containers do I need and how do you load the machines?
A: For one Schlafhorst SE9, SE10 Open end with 288 spindles you will need 2 complete 40FT high cube containers. The fees of the sections will be removed and the open end sections will be secured on special palettes made for this purpose. On section of open end will be on top of the other will be held by a metal frame to avoid any damage. We usually have these farmes made for few hundred dollars each.
Q: I have some questions about your used Schlafhorst Autocoro 8 Open end spinning machines from 2012 with 480 spindle:
What is the running count and rotor speed?
A : We are producing from 7s to 32s on these ACO8.
machine is running 12000 ~ 14000 ,It is up to count; but this machine can run much faster ; wewant to produce high quality ; that is why we run lower speed.
Q: Also please confirm the availability of Synchropiecing.
A : Yes ACO8 No 2 is 12 spindles ,the rest is 6 spindles
Q: What is the the feed can diameter
A : Can diameter 1100 X 500mm
Q: What is the machine length for 480 Rotor machine ?
A : Complete lenght on the mill floor is : 60790mm
Q: What yarn count can produce a usd Rieter BT 902 open end spinning machine with Exit 6'' 4º 20' ?
A : This Rieter BT-902 can do 8Nm – 20Nm.