Menu

Used Winding and reeling

1,196 results
0

Year 2011. Dec ~ 1 set (20 spindle)... Year(s) : 2011 Location : ASIA (North East)

Price : On request

More details  
1

- 44 heads - right head feeding from cone automatic – pc kontron - clearers Loepfe Zenit FC with heads T... Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

- Nr. 40 heads (20+20) – delivery 6” - gauge 152 mm. – ring tube h. 280mm. - conicity 5°57’ - clearers Ust... Year(s) : 2012 Location : EUROPE (Western and Northern)

Price : On request

More details  
5

24 heads – (Loading form max 4 yarns x head) computer panel control to drive 6 heads x set- with counter mete... Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

More details  
3

12 heads – (Loading form max 4 yarns x head each one head equipped of computer control with counter meter and... Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

More details  
6

Air Splicing, Single Spindle 10 inch travers 15 Pocket Magazine Feed Year(s) : 2010 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
9

60 spindles Uster quantum 2 yarn clearer IMK O30 without FFD, magazine type with 9 pockets. 2 turns DZ3 splice... Year(s) : 2010 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
5

Year: 2006-03-28 , 2007-07-24 No of Drum : 50Dr Dgree : 4°20" / Biko Both type Yarn Clearer : TK-840 Drums : S... Year(s) : 2006, 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

60 Hz 220 Voltage Cone: 6 3/4” Long 85° degree angle Inside 2 5/8” Outside 2 3/4” Top of Cone 1 7/16” Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Gıcır ​​Makine brand yarn cop ( Tavel ) transfer machine 60 mes Year(s) : 2020 Location : MIDDLE EAST

Price : On request

More details  
0

1 set x 50 drum 1 set x 40 drum Magazine. Year(s) : 2001 Location : ASIA (North East)

Price : On request

More details  
0

- n.18 heads - single side - grooved drum 2,5 turns, variable pitch - pitch 152 mm. (6") - conicity 5°57' arm... Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

More details  
0

- n.24 heads - pitch 8"(200 mm) - cylindrical tube diam.43 mm - 3 ply internal creel - n.3 optical sensor BTSR... Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

More details  
5

MURATA 303 – JAPAN Year 1993, 2 SETS, 160 SPINDLES, V COM TENSION, 3400-4100 RPM Year 1993, 1 SET, 192 SPINDLE... Year(s) : 1993, 1998, 2017 Location : ASIA (South East)

Price : On request

More details  
8

Savio Orion L winder yoc 2004, 2005 and 2006 64 positions Mesdan splicer 590 L Yarn clearer Löpfe TK 840 Year(s) : 2004 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

Schlafhorst 238 Winding of 60 spindles Manual Feeding cone to cone Knotting device Uster Polimatic 19... Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

More details  
0

- n.20 heads - pitch 8 inch(200 mm) - cylindrical tube diam. 43 mm - main unit DX - internal creel for 3 ply -... Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

More details  
0

- n.28 heads - main unit DX - automatic doffing - pitch 8 inch ( 200 mm ) - internal diameter tube 43 mm - ext... Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

More details  
0

- n.40 heads - feeding by cone with automatic cone change - drum with 2 turns constant pitch - 6 inch ( 152 mm... Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

50 Winder, 6 or 12 spindles, 6" traverse (2) positions set up for tubes and 10 positions for cones with top tr... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

8 positions 10" traverse on 2-7/8" ID tubes, tensions, yarn break sensors speed 0-1000 YPM, 32 pin supply cree... Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

4 positions fully automatic with hopper/feeder for U, G, and M size bobbins. 20mmOD x 10mm wide, 220v. Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Traverse 330 mm, take up Ø 90 mm Suitable for PP tape In total 269 pcs. The units are very mechanical (very l... Year(s) : 1984 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

With n.36 heads; electronic yarn guide; motorized tailstock; precision crossing; Pitch 8"(200 mm) with the pos... Year(s) : 2005 Location : EUROPE (Western and Northern)

Price : On request

More details  
2

-head left magazine right -n.20 heads -n.2 spools loader -n.2 spools preparator -n.2 automatic magazine empty... Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

More details  

You can find used Winding and reeling on Wotol

The main manufacturers of Winding and reeling are Savio, Schlafhorst, Murata, Fadis, Ssm, Corghi, Muratec, Motocono, Rite, Hacoba, Gilbos, Croon-Lucke, Zerbo, Karl mayer, Schweiter.
The main models of Winding and reeling are Espero, Orion, Polar, X5, 338 RM, 7-II, 7-V, 7-7, 21C, TUAN series, Sincrotex, PW/DP series, AER/L, RC series, HDW, AC5
 
HS code 8445 - Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 84.46 or 84.47. 
HS code 84454010 - Textile winding (including weft-winding) or reeling machines : - Electrically operated 

Q&A corner - questions and answers from members

Q: How is the Murata Rewinding Machine7-2 measurement system working in your machine?
A: Lenght Measurement is not sensitive but can be used for weft rewinding. Can be run with hand knotter

Q: What is the range of the hank diameter of your Fadis Electronic Hank-to-cone winder TUAN/E 500?
I know the machine comes in sections of 5. We have only 15 heads today and can probably only fit in 15 to 20 head in the space we have, but if we can put the last 5 heads in angle it will work and good for our capacity. I only worry about the control unit. I guess we can make the cables longer. Maybe you have an idea?

A: The Fadis Hank-to-cone winder has a reel with an adjustable circumference from 1100 to 1650 mm
The machine has 5 heads modules, you can install the machine at an angle e.g. 15 + 10 heads or 30 + 5 heads etc etc. simply extend the power cables and install an extra module support leg.

Q: I need a machine to assemble yarns for fish nets. What model do you recommand?
A : One of our customer was using a Lezzeni BRD Assembly twister 80 spindles (40x2), 4/6 endslateral creel, gauge 240 mm., ring diam. 165 mm to produce yarn for fishnets.
He is producing from 470 denier to 7000 deniers.

Q: How is the lubrification system of the ring on a Lezzeni assembly twister? Is it automatic pumping?
A : Lezzeni machines don't use pumps. They have automatic centralized lubrification system by means of capillary distribution.

Create an alert