Used Winding and reeling
1,258 resultsAir Splicing Single Spindle 10 inch traverse 15 Pocket Magazine Feed 480 Volts 3 In Inside Diameter All are li Year(s) : 2010, 2011, 2012 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details40 Spindels/Positions Year(s) : 2001 Location : EUROPE (Western and Northern)
Price : On request
More details35 positions, Digicone, Preciflex (also used for remnant winding) Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsfor wastes recovery cone - n.24 heads of which n.16 heads feeding from wastes cones with revolver 5-position m Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsSpindles: 32 Spindles each Equipped with Propack & Variopack Wet Splicing System Suitable for Cylindrical Cone Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details- single side - 5 meter swift length - adjustable perimeter via proximity from 1400 to 2000 mm - n.20 hanks wi Year(s) : 1996, 1999 Location : EUROPE (Western and Northern)
Price : On request
More detailsYears 1999, 2002, 2x 2003 Spindles 20 Trav Length 4” AUTOM.DOFF,MESDAN splicer, for FINAL CONE Year(s) : 1999, 2002, 2003 Location : EUROPE (Western and Northern)
Price : On request
More detailsAdjustable electronically crossing angle Adjustable electronically hank width 40 heads Adjustable electronical Year(s) : 2018 Location : EUROPE (Western and Northern)
Price : On request
More detailsWINDER HANK TO CONE AND CONE TO CONE REWINDING MACHINE HTC Make: Rite Year: 2000 30 heads positive feed 4° Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More details1 x Assembly Winder Make RPR Type GRB 24 spindles Location : EUROPE (Western and Northern)
Price : On request
More details7 x EVILO winders, 2000-2006 6 spindles each traverse 10 inches creel for three tubes. Year(s) : 2000, 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsLocation : EUROPE (Western and Northern)
Price : On request
More details10 spindles / positions each machine (each machine 5 positions on each side) Year(s) : 1989, 1990 Location : EUROPE (Western and Northern)
Price : On request
More details- with manual loading 1 position -N.32 Heads -Run 6″ – Conicity 4°20″ -Slub catchers Loepfe Yarn Master -Waxin Year(s) : 2001 Location : EUROPE (Western and Northern)
Price : On request
More details– N.10 Positions = 30 yarns total – N.30 Motocono winding heads – Stainless steel belt width 110mm – Exit on c Year(s) : 2010 Location : EUROPE (Western and Northern)
Price : On request
More detailsDrums 60 Loepfe Yarn Clearer Measuring Head Type TK 940F Waxing Feed Magazine Splicer Nozzle G2Z OHTC Doff Year(s) : 2006 Location : ASIA (South East)
Price : On request
More detailsDrums 60 Uster Yarn Clearer Quantum 2 IMK C15 Measuring Head Waxing Conicity 4°20' Magazine Feed Splicer N Year(s) : 2008 Location : ASIA (South East)
Price : On request
More detailsMurata OHTC Magazine Feed 60 Drums Uster Yarn Clearer Quantum 2 IMK C15 F23 Measuring Head Conicity 4°20' Year(s) : 2008 Location : ASIA (South East)
Price : On request
More detailsDX Feed Steel Drum 60 Drums Uster Quantum 2 Measuring Head Type iMK C15 F23 FD Channel Available Drum Turns Year(s) : 2008 Location : ASIA (South East)
Price : On request
More detailsSohler OHTC Feed: Magazine 60 Drums Uster Yarn Clearer Waxing Conicity: 4°20' Year(s) : 2010 Location : ASIA (South East)
Price : On request
More details8x Year 1997 3x Year 1996 Year(s) : 1996, 1997 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsused to take small yarn packages and upwind to larger packages automatically. Year of manufacture – 1 is 2007, Year(s) : 2007, 2008 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details8 spindle air entanglers with creels. Belmont control system has been replaced with touch screen for start, Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsRemain winder available: 5x 8 head Belmont winders 2x 6 head Belmont winders. We will replace the PLC with Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsInverter. 480V/3Ph/60Hz. Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsYou can find used Winding and reeling on Wotol
Q&A corner - questions and answers from members
Q: How is the Murata Rewinding Machine7-2 measurement system working in your machine?
A: Lenght Measurement is not sensitive but can be used for weft rewinding. Can be run with hand knotter
Q: What is the range of the hank diameter of your Fadis Electronic Hank-to-cone winder TUAN/E 500?
I know the machine comes in sections of 5. We have only 15 heads today and can probably only fit in 15 to 20 head in the space we have, but if we can put the last 5 heads in angle it will work and good for our capacity. I only worry about the control unit. I guess we can make the cables longer. Maybe you have an idea?
A: The Fadis Hank-to-cone winder has a reel with an adjustable circumference from 1100 to 1650 mm
The machine has 5 heads modules, you can install the machine at an angle e.g. 15 + 10 heads or 30 + 5 heads etc etc. simply extend the power cables and install an extra module support leg.
Q: I need a machine to assemble yarns for fish nets. What model do you recommand?
A : One of our customer was using a Lezzeni BRD Assembly twister 80 spindles (40x2), 4/6 endslateral creel, gauge 240 mm., ring diam. 165 mm to produce yarn for fishnets.
He is producing from 470 denier to 7000 deniers.
Q: How is the lubrification system of the ring on a Lezzeni assembly twister? Is it automatic pumping?
A : Lezzeni machines don't use pumps. They have automatic centralized lubrification system by means of capillary distribution.
Q: Regarding your used Ssm Winders PW1-F 60 positions, Precicontrol from 2001, you mention it has been refurbushed in 2015. What kind of job has been done on the winder?
A : All the plates of the guide have been modified o our SSM PW1-F 60. Since the sliding shoe usually cuts them, we have restored the seats by placing a tempered steel plate to make them eternal. In 2021 all the ceramics of the new grids were placed and the chromed curls of the balloon were replaced.
Q: I need a used Schlafhorst Autoconer 338 K from 2001 with aqua splice, also symmetrical cylindrical drums because I need to make cylindrical dyed reels. It it is what is written in your description but on the photos we see the conical and not cylindrical tubes. Plese confirm.
A : Yes, acqua Splicer ad ar symmetrical 6 '' 4°20
Q: Regarding the used Murata Rewinder 7R2 from 1990 5 revolvers of 24 positions each please answer the following questions:
A : - What's the diameter of each position in the revolver? 60 mm
- Is the knot 100% automatic or do we have to do something manually? 100%
- Is it possible to work with single and double yarn or just single? Both
- What's the range of metric yarn we can work with? 7/2 – 15/2 metric