Used Wood Saws / Cutters

An apparatus with 800 mm diameter of handwheels and a cast iron table. The rest of the iron, at 380 v voltag Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

700 mm. steering wheel A 380 v. voltage and 5 hp. motor power. Its measurements are 1400 x 900 x 1900 mm. Ap Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Brand : ANETO 800 mm, with a steering wheel diameter. At 380 v. voltage and 5.5 hp. motor power, closed wit Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

3,800 mm useful cut, with front load Three air tables for sliding the boards to work Five rear clamps to drag Location : EUROPE (Western and Northern)

Price : On request

3800 mm useful cut Front loading and 80 mm high production cutting height Four 2000 mm long front tables with Location : EUROPE (Western and Northern)

Price : On request

With carriage Year(s) : 2007 Location : EUROPE (Western and Northern)

Price : On request

Brand : PRUDANIK Pneumatic milling machine for armoured doors. Used for clamps, hinges, locks... Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

With manual tilting scoring saw 3200 mm Saw parallel upload guide and electronic tilting Year(s) : 2004 Location : EUROPE (Western and Northern)

Price : On request

Holz-Her 1230 Maximum useful length 5300 mm Maximum height 2200 mm Built-in grater Maximum cutting thickness 8 Location : EUROPE (Western and Northern)

Price : On request

300mm width multi-blade saw with chain advancement 50Hp engine Year(s) : 1993 Location : EUROPE (Western and Northern)

Price : On request

With pressure tool with clamps Scoring saw set and air front tables 15 Hp engine Year(s) : 2004 Location : EUROPE (Western and Northern)

Price : On request

17" Band Saw Motor: 5 HP Max cutting width: 16-1/2 in. Max cutting height: 16 in. Table size: 25-1/2 in. x 21" Year(s) : 2021 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Helle 5-Head Block Sawmill Helle Circle Sawmill - Unit has been dismantled and ready to load Log capacity: 8'- Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Digital Readout Bi-directional 6' DEP Saw Bar Waste Conveyor Year(s) : 2023 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Complete system still under power for inspection. Ready for immediate removal: Log Deck LT300 Sawmill - Unde Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Helle Scragg Mill End Dogging Carriage Sawcab Helle Vertical Edger Helle Power Panel Infeed Log Deck: 4-Stran Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Manufacturer’s Specs: Produces Upwards of 500 Pallets/Shift • Single Operator Machine • New and Reclaimed Lumb Location : AMERICA North (USA-Canada-Mexico)

Price : On request

The 524-SB/SR was used to infeed boards and rip them into long sections. Inside it has a shaft for (10) blades Year(s) : 2016 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Angular Panel Saw For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck in Location : AMERICA North (USA-Canada-Mexico)

Price : On request

5-Head Resaw Unit has been service. Bandwheels have been resurfaced. Machinery is disconnected and ready to Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Good Running Condition Ready To Load Year(s) : 1979 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Kohler 38hp Motor Good Condition Available Immediately Year(s) : 2019 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2-Head Horizontal Resaw 12@x12” Capacity 30 HP Motors 20-120 FOM hydraulic feed Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request