Used Winding and reeling
1,220 results-n.50 heads -left head -pitch 6” (152 mm) -conicity 4º 20’ -automatic bobbin loader -n.2 bobbin preparers -cad Year(s) : 2011 Location : EUROPE (Western and Northern)
Price : On request
More details-n. 60 heads each -n.1 m/c right head -n.1 m/c left head -pitch 6” (152 mm) -conicity 4º 20’ -automatic bobbin Year(s) : 2015 Location : EUROPE (Western and Northern)
Price : On request
More details1x SSM precision winder type DP1-W DIGICONE preciflex 15 positions, year 2005 1x SSM precision winder type DP Year(s) : 2005, 2012 Location : EUROPE (Western and Northern)
Price : On request
More details56 high-precision heads, suitable for both fine and bulky yarns Electronic drive system for rapid, accurate ad Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More detailsFOUR MACHINES ARE IN PERFECT WORKING CONDITION PACKAGED AND READY TO SHIP Location : Russia
International Socks Ltd
Jun, 30
92 SPINDLE PRECEION WINDER TYPE CLV/200 (DOUBLE SIDED) Location : EUROPE (Western and Northern)
Price : On request
More detailsNO. OF SPINDLES: 6 TRAVERSE: 10 INCH (25.4 CM) OUTPUT TUBE: 11 INCH (28CM) CREEL: 5 ENDS PER SPINDLE Year(s) : 1993 Location : EUROPE (Western and Northern)
Price : On request
More details60 position, with oil device update photons as attached the machine stopped at factory floor Year(s) : 2013 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsoverhauled in 2018 for coarse yarn counts tubes until 450 mm length 24 spindles 8” traverse,conical tubes 3°3 Year(s) : 1979 Location : EUROPE (Western and Northern)
Price : On request
More details<b>1 x Croon & Lucke Z60C, ca. 1980</b> Double sided, Specification: For 5 Jumob.hanks until 3-4 kg each side Year(s) : 1980 Location : EUROPE (Western and Northern)
Price : On request
More detailsFor 2 x 8 = 16 Jumbo-hanks until 3-4 kg, conic and cylindric, Circumference 1,60 – 2,30 m, width 200 – 400 mm Year(s) : 1985 Location : EUROPE (Western and Northern)
Price : On request
More details2 x 12 spindles. 6“ traverse outstanding creel for 6-ply electronic sensors, speed 400-800m/min Year(s) : 1993 Location : EUROPE (Western and Northern)
Price : On request
More details6 spindles, 12“ traverse, cylindrical tubes 325 mm length diameter inside 72 mm, automatic doffer with outstan Year(s) : 1990 Location : EUROPE (Western and Northern)
Price : On request
More details6 spindles, traverse 250 mm cylindrical tubes Ø 72x290 mm assembling cones 4-6kg, metercounter, automatic doff Year(s) : 1994 Location : EUROPE (Western and Northern)
Price : On request
More details<b>1 x bobbin winding machine/take up winder, 2005</b> single sided, 72 spindles (4 x 18 spindles in 4 etages) Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More details16 spindles 10”, tubes 1°50, 280 mm, splicer Loepfe clearer TK680 for Nm 0,8 - 10S-magazins for winding from Year(s) : 1988 Location : EUROPE (Western and Northern)
Price : On request
More details16 spindles, 10‘ traverse = 250mm, tubes 280mm, 3°30, for hanks 1,50-2,00m circumference, until 1.000g waxing Year(s) : 1969 Location : EUROPE (Western and Northern)
Price : On request
More details21 spindles, 6”= 150mm traverse, tubes 5°57, 170mm length for hanks 1,20-1,80m circumference, waxing device Year(s) : 1985 Location : EUROPE (Western and Northern)
Price : On request
More details30 spindles, 6“ traverse, 2gg asymmetric electronic clearer Loepfe TK 740 AC thermosplicers, good condition. Year(s) : 1991 Location : EUROPE (Western and Northern)
Price : On request
More details30 spindles, 6” traverse 2gg cylindrical tubes, conical also possible Autospeed, thermosplicers, waxing device Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More details30 spindles, 6” traverse 2gg cylindrical tubes conical also possible Autospeed, thermosplicers waxing device L Year(s) : 1997 Location : EUROPE (Western and Northern)
Price : On request
More detailsGAUGE : 180 mm SPINDLE NUMBER PER SECTION : 8 MAXIMUM SPINDLE NUMBER : 120 RING DIAMETER : 115-127 mm TUBE HEI Year(s) : 2011 Location : MIDDLE EAST
Price : On request
More detailsLoepfe 930S clearer 9 yarn 690 splicer 5 sets 64 spindle & 8 sets 60 spindle Running condition Year(s) : 2006 Location : ASIA (China - Taiwan - HKG)
Price : On request
More details2 FADIS S.P.A, TYPE SINCRO/ FC 500, Year 2006 1 FADIS S.P.A, TYPE SINCRO/ FC, Year 2005 2-FADIS S.P.A, TYPE FA Year(s) : 2002, 2005, 2006 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details– 4 heads. – From skein to cone. – For skeins from 500 to 700 gr. – Mechanical shots. – 20 mm wide winders. – Year(s) : 1990 Location : EUROPE (Western and Northern)
Price : On request
More detailsHave an additional service panel to control them in the workshop, during maintenance work. The winders are fu Year(s) : 2001 Location : EUROPE (Central and Eastern)
Price : On request
More detailsYou can find used Winding and reeling on Wotol
Q&A corner - questions and answers from members
Q: How is the Murata Rewinding Machine7-2 measurement system working in your machine?
A: Lenght Measurement is not sensitive but can be used for weft rewinding. Can be run with hand knotter
Q: What is the range of the hank diameter of your Fadis Electronic Hank-to-cone winder TUAN/E 500?
I know the machine comes in sections of 5. We have only 15 heads today and can probably only fit in 15 to 20 head in the space we have, but if we can put the last 5 heads in angle it will work and good for our capacity. I only worry about the control unit. I guess we can make the cables longer. Maybe you have an idea?
A: The Fadis Hank-to-cone winder has a reel with an adjustable circumference from 1100 to 1650 mm
The machine has 5 heads modules, you can install the machine at an angle e.g. 15 + 10 heads or 30 + 5 heads etc etc. simply extend the power cables and install an extra module support leg.
Q: I need a machine to assemble yarns for fish nets. What model do you recommand?
A : One of our customer was using a Lezzeni BRD Assembly twister 80 spindles (40x2), 4/6 endslateral creel, gauge 240 mm., ring diam. 165 mm to produce yarn for fishnets.
He is producing from 470 denier to 7000 deniers.
Q: How is the lubrification system of the ring on a Lezzeni assembly twister? Is it automatic pumping?
A : Lezzeni machines don't use pumps. They have automatic centralized lubrification system by means of capillary distribution.
Q: Regarding your used Ssm Winders PW1-F 60 positions, Precicontrol from 2001, you mention it has been refurbushed in 2015. What kind of job has been done on the winder?
A : All the plates of the guide have been modified o our SSM PW1-F 60. Since the sliding shoe usually cuts them, we have restored the seats by placing a tempered steel plate to make them eternal. In 2021 all the ceramics of the new grids were placed and the chromed curls of the balloon were replaced.
Q: I need a used Schlafhorst Autoconer 338 K from 2001 with aqua splice, also symmetrical cylindrical drums because I need to make cylindrical dyed reels. It it is what is written in your description but on the photos we see the conical and not cylindrical tubes. Plese confirm.
A : Yes, acqua Splicer ad ar symmetrical 6 '' 4°20
Q: Regarding the used Murata Rewinder 7R2 from 1990 5 revolvers of 24 positions each please answer the following questions:
A : - What's the diameter of each position in the revolver? 60 mm
- Is the knot 100% automatic or do we have to do something manually? 100%
- Is it possible to work with single and double yarn or just single? Both
- What's the range of metric yarn we can work with? 7/2 – 15/2 metric