Ashe ONYX, Slitter rewinders 1600 mm
Converting machines - Slitter rewinders
Working width (mm): 1600
Materials: Suitable for use with CPP BOPP PET PE and Laminates
Unwinder type: Shaftless
Max diameter reel unwinder: 1000
Rewinder type: Double shaft center driven
Max diameter reel rewinder: 600
Duplex cantilevered centre winder ( supported in running position)
Rewind tension : 25kg/shaft maximum; rewind core 76mm;
Slitting available : razor or rotary shear;
The unwind is fully interlocked with the main machine and incorporates local controls for machine speeds, stop and unwind functions.
Integrally mounted shaftless unwind stand with all functions eletrically controlled.
Two controlled arms pick up reels on center line to locate roll from a truck or over head crane and as a pair to correct axle position.
Unwind tension is maintained by a disc brake rated for continual running.
Unwind tension is maintained by a disk brake rated for continual running.
Unwind assembly is mounted on low friction linear guides anchored to the machine by a sub frame.
An electric guider system with sensor for edge guide only is fitted integral with the machine.
A driven in feed nip system is provided with a hard chrome roller and rubber covered nip with control of nip on/off.
All idle rolls are made of lightweight aluminium, balanced and cork covered for web friction.
Duplex centre wind rewinds with a pair of 76mm ashe unique differential core lock shafts .
Dovetail mounting for pneumatically controlled lay on rollers with adjustable air ports for top and bottom rewinds.
Built in control console houses all electric drives, signal processing and operator controls.
Electrics: 380-460volt, 3ph, 50/60hz, 30kva, fused at 40 amps, input cable size 10mm.
Pneumatic: 100psi constant air supply oil and water free.
Machine size: width 2900 x depth 640 x height 1500mm.
Floor area required with integral unwind stand 4 x 4m approximately