Carlton RADIAL DRILL 4A 1200 RPM

CARLTON RADIAL DRILL
Model: 4A

Drills to Center of Circle: 14' Diameter
Column Diameter: 17"
Spindle Speeds: 12 to 1200 RPM
Feeds: .004" to .125" Per Revolution
Spindle Tap Leads: 8, 11-1/2, 14 & 18 TPI
Spindle Taper: #6 Morse
Spindle Diameter: 4" Driving
Vertical Spindle Travel in Head: 20"
Face of Column to Center of Spindle: 13-1/4" Min., 84" Max.
Spindle Radius: 27" Min., 96" Max.
Distance Spindle to Base: 14-1/2" Min., 72" Max.
Working Surface of Base: 50" x 89" x 10" High
Traverse of Arm on Column: 37-1/2"
Traverse of Head on Arm: 72-3/4"

EQUIPPED WITH:
Power Elevation of Arm on Column
Power Clamping to Head, Column & Arm
Rapid Traverse of Head on Arm
Built-In Machine Work Light
Friction Type Forward/Reverse Clutch
Hard Replaceable Wear Strip for Head on Arm
The Rear of Machine Base Has a Bolt-On T Section
Adjustable Quill Counterbalance Setting
Arm and Column Ways are in Good Condition
Plain Box Table: 26" x 33" x 20" High with T Slots on Top and Face
Carlton Tilting Box Table: 28" x 32" x 24" High with T Slots on Face and Top
L Section Base Size: 38" x 31" x 10" High
Coolant Pump and Piping
15 HP Main Motor
Wired for 3 Phase, 60 Hz, 220/440 Volts

Overall Size:
Machine with Plain Box Table: 164" LR x 60 " FB x 130" High x 30,000 Lbs.
L Section Base with Tilting Box Table: 39" x 39" x 35" High x 2.425 Lbs.