Menu

Cincinnati 3′ x 9″ Radial Arm Drill 1500 RPM

Ref : 2421025-3-GO
Condition : Used
Manufacturer : Cincinnati
Model : 3′ x 9″ Radial Arm Drill
Spindle Speed : 1500 RPM
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

3′ x 9″ Cincinnati Radial Arm Drill

(9) Spindle Speeds: 75 to 1500 RPM
(4) Feeds: 2, 4, 7 & 10 Thousandths per Revolution
Spindle Taper: #4 Morse
Quill Diameter: 2-5/8″
Quill Travel: 6-1/2″
Base Working Size: 30″ x 36″
Distance Centerline of Spindle to Column: 14-1/4″ Min. to 39-3/4″ Max.
Distance Spindle Nose to Base: 25-1/2″ Min. to 52-1/2″ Max.

EQUIPPED WITH:
Manual Radial Clamping and Clamping of Head on Arm
Mono Level Power Arm Elevation Control
Hard Replaceable Way Strip on Arm
Hand & Lever Arm Control of Quill
Arm & Column Ways in Good Condition
Worktable Size 22″ x 22″ x 22-13/16″ High with (3) T-Slots (no table face)
Worktable Rotates 360 Degrees and Tilts 90 Degrees
1/8″ to 5/8″ Capacity Jacobs Key Type Drill Chuck with Key
Designed For but NO Coolant Pump or Piping
3 HP Motor, Wired 3 Phase, 60 Hz, 208/230 Volts Only
Wired for 230 Volt Operation
Overall Machine Size: 85″ L-R x 34-1/2″ F-B x 80″ High (to floor)
Approx. 5,000 Lbs.

Other machines similar to Cincinnati 3′ x 9″ Radial Arm Drill 1500 RPM

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1965
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1954
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1950
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1959